home Cards

Lg g pro w3bsit3-dns.com firmware. Getting Root LG Optimus G Pro. What firmware do we have

Instructions for installing the official stock firmware (kdz-file) on LG Optimus G Pro (E98x, F240x).

Drivers and programs

Attention!

Installation instructions

Make backups of all user data and copy them to a PC.

Disable all anti-virus programs on the computer, if any.

Put phone into download mode ( Download Mode).
To do this, turn off the device and connect it to the computer via a USB cable, while holding down the Volume Up button and release it when the “Download Mode” message appears.

Run LGFlashTool2014.exe as Administrator and in the program you must perform the following steps:
- In the drop down list select type» select value « CDMA».
- In the drop down list PhoneMode» select value « EMERGENCY».
- In field " Select kdz file» Specify the path to the previously downloaded firmware file.
- Click on the button " Normal Flash» for flashing without data loss or « CSE Flash"- firmware with reset to factory settings (all user data on the device will be deleted, including files on internal memory).
- In the appeared window " Read Phone Information» click « start' and wait for the download to finish.
- In the new window that appears Select Country & Language» select country « different country"and language" English". If the language selection list is empty, leave it unchanged and click the " OK» to start flashing. LG Mobile Support Tool will be launched.
Note:
- If a message appears that the phone is not connected to the PC (The phone is disconnected from PC), it must be disconnected from the computer and reconnected by holding the Volume Up button (enter Download Mode) and try again.
- Until the end of the process, it is not recommended to disconnect the device from the computer, and after that the smartphone will be rebooted and a new firmware will already be installed on it, with which we hasten to congratulate you.
- The initial startup usually takes a long time, but no more than five minutes. If after this time the device is still “hanging” on boot, you need to reset the device to the factory state. To do this, turn off the device, then turn it on while holding down the Volume Down key until the LG logo appears on the screen. Then release the Power button and hold it down again. Hold both buttons until the Hard reset menu appears. To continue the action, you must press the Power button or any of the volume keys to cancel it. To confirm, press the Power button again or any of the volume keys to cancel. The device will reset and format the internal memory.

If you want your smartphone to work stably, support all the latest features and innovations, and also have the highest performance, then it needs to be updated. There are two ways you can update operating system his LG G Pro 2 until the very last. First, these are the official OTA updates from LG. Secondly, custom firmware, of which there are a huge variety. In the following, we describe both processes in detail.

To update the OS version LG G Pro 2 to the very last, the easiest way is to use OTA. This type of update works automatically. In addition, you can do the whole procedure yourself. In both cases, the phone's warranty remains intact and you get the official version of the OS from your device's manufacturer or carrier. mobile communications. Manual installation is necessary if the official update has already appeared on the network, but does not yet work for a specific region. Also, this method can be useful for those users who are going to return from custom ROM "but to the official firmware.

As for the preparatory step required when manually installing an update, this is the creation backups all important data; disabling anti-virus programs on PC and smartphone; enable USB debugging in developer options LG G Pro 2; battery charging (not less than 50%). Also, you should remember that this manual is only suitable for LG G Pro 2, and the entire responsibility for the operation lies solely with you.

Update LG G Pro 2 with OTA

Make sure your LG G Pro 2 connected to a Wi-Fi network.
Press the menu button and go to settings.
Open option About phone and select the item software update.
Update your smartphone OS to the latest.
The procedure will take place automatically, after which LG G Pro 2 will reboot.

Update LG G Pro 2 manually

1. Download required drivers and update file for LG G Pro 2.

2. Install the drivers on the PC.

3. Unpack KDZ_FW_UPD_EN and install B2CappSetup from the received folder.

4. Find and install msxml.msi there.

5. Navigate to C:\ProgramData\LGMOBILEAX and delete all files there.

6. Extract contents of LGMOBILEAX to C:\ProgramData\LGMOBILEAX

7. Open c:\windows\system32\drivers\etc\hosts and add 127.0.0.1 csmg.lgmobile.com

8. From the shttps folder, start http.

9. Launch and enable Windows Enabler.

11. Install emergency, 3gQCT and click NORMALL WEB UPGRADE TEST

12. The firmware will be installed on your LG G Pro 2.

Update LG G Pro 2 with

1. Install on LG G Pro 2 custom recovery image by unlocking the bootloader and getting root rights.

2. Download the update file specifically for your smartphone model.

3. Download the application package from Google.

4. Do not unpack these files. By connecting LG G Pro 2 to a PC, transfer both archives to your smartphone using USB.

5. Disconnect the device from the computer and start the recovery mode on LG G Pro 2.

6. Make a wipe: wipe data factory reset, wipe cache partition And wipe dalvick cache.

7. Return to the main recovery menu and select the following options: install zip from SD card And choose zip from SD card.

8. Install the update file.

9. Do the same for Gapps.

10. Return to the main menu and restart LG G Pro 2 (reboot system now).

In theory, this is how installing updates for LG G Pro 2. With practical application, you will have to figure it out on your own, and do not forget that you act at your own peril and risk.

This article contains information about mobile device. Here you can download the latest android firmware on LG Optimus G Pro E980, and you can also get root rights .

You can read more about root rights. Instructions for getting it are below.

In what cases it is necessary to update the firmware

I want to install a new firmware to expand the capabilities of a mobile device;
Recovering from an unsuccessful firmware is necessary
The device constantly reboots for no reason;
The device does not turn on.

What firmware do we have

To download firmware Android 5.1 Lollipop, 6.0 Marshmallow, 7.0 Nougat, Android 8.0 O on the LG Optimus G Pro E980, read the article in full - this is very important. By installing a new available android version, you will be surprised by the new possibilities. And also you can find the official version of the MIUI firmware of different versions and custom original firmware.

You can leave feedback about the device through the comment form and we will publish them.

Firmware available: In stock.

Download firmware

Leaving a review through the comment system, indicate a real email if you have problems installing the firmware. Please note that we provide free consultations and therefore may be delayed in responding. In addition to the administration, ordinary users can answer and help you, just like on the forum.

The manual on how to install the firmware is on the links below. Firmware download for LG Optimus G Pro E980 is available via torrent with instructions.

Firmware installation instructions

To download, select the firmware you need and click on the link.

To install, do the following:

Download the file with firmware and special program
Run the program on the computer
Select the required firmware version
Strictly follow all instructions from the archive

Video on firmware LG Optimus G Pro E980

LG Optimus G Pro E988 Kdz Firmware Flash File/Stock ROM LG Optimus G Pro E988

Requirements For Flashing kdz on LG Optimus G Pro E988

How To Flash LG Optimus G Pro E988

Extract/Unzip the LG Flash Tool 2014.zip file that you downloaded above on your PC. You'll get a bunch of files required to run the program.
Double-click/Run LGFlashTool2014.exe file to Open LG Flash Tool.If it doesn't open, install Visual C++ Runtime Library from here and then try again.
Boot your LG device into Download Mode:
Power off your LG Optimus G Pro E988 device
Press and hold Volume Up button.
Connect your device to PC with a USB cable while holding the Volume Up button.
Now load the .kdz firmware file into LG Flash Tool window on your PC. Click the Browse button at the end of the “Select KDZ file” line. Leave every other option as is in the LG Flash Tool for LG Optimus G Pro E988
Once you’ve selected .kdz firmware file, click “CSE Flash” button to proceed on flashing the .KDZ firmware to your LG device.
Normal Flash” button doesn’t wipe data, and the “CSE Flash” button wipes data. If you're upgrading from a stock firmware, then “Normal Flash” might do.
You'll get a "Read Phone Information" window; it will be blank for the most part. Hit the START button and proceed.
Now you'll see “Select Country & Language” window. Select "Different" from the country list and then "English" from the language list. And remember NOT to tick the Smartphone upgrade checkbox, it’s for Windows Mobile phones, not your LG device running on Android
You'll see a progress bar now. Wait until it's 100%, after which you might get an error “Connection to server failed”. It's okay. DON'T disconnect your phone at this point
firmware update progress on your phone. Once it's complete, your phone will reboot.
After the flashing process starts, it might take up to 5-10 minutes. So keep patience and wait

This article contains information about the mobile device. Here you can download the latest Android firmware for LG Optimus G Pro E980, and you can also get root rights.