MTS Smart Start description and unlock from the operator. MTS Smart Start description and unlock from the operator MTS smart start 3 for all operators
Let's consider one of the ways how to untie the phone from the operator ZTE Blade L110 (Velcom) aka MTS smart start 3 using the firmware.
Necessary:
- Drivers android_spreadtrum_driver.zip
- Flash driver program SPD_Upgrade_Tool_R4.0.0001.zip
- Archive with firmware MTS_RUSSIA_MTC_SMART_Start_3_V1.0.2.ZIP
Driver installation
We press the "Volume Down" and "Power" buttons on the phone, connect the microUSB cable and insert the battery without releasing the buttons. A new device will appear in Device Manager:
Right-click on the Gadget Serial device, select the items "Update drivers" - "Search for drivers on this computer" specifying the folder with the drivers downloaded first, depending on the bitness of Windows.
When installing drivers, a warning may appear, click "Install this driver software anyway"
After the driver installation is complete, possible warning that the driver is installed without a digital signature and it will not work correctly. We do not pay attention to this, because we have disabled signature verification and the driver will not be damaged.
If everything is done correctly, a new SCI Android USB2Serial device will appear in the Ports (COM and LPT) section.
IMPORTANT!!! If a yellow exclamation mark appears next to the icon, you have not removed the digital signature verification. And of course, flashing will not work. In this case, uninstall the driver, reboot the system, disable signature verification, and reinstall the driver.
Start firmware ZTE Blade L110
If everything worked out and the result is the same as in the picture above, disconnect the phone from the computer and open the program - flash driver.
Click on the big gear
choose the ZTE Blade L110 firmware file in *.pac format.
At the bottom of the program window, a firmware download bar should pass.
When everything is ready, the right arrow button will become active, click on it.
Again, press the "Volume Down" and "Power" keys on the phone, just as we did before, connect the microUSB and, without releasing the keys, insert the battery. The firmware process will start automatically after the device is detected by the program.
IMPORTANT!!! After starting the firmware, on some devices, the volume and power buttons can be released. But there are times when you release the buttons - the firmware stops with a notification that the device is turned off and the firmware is interrupted. I recommend holding the buttons during the entire firmware (no more than 10 minutes).
After the firmware is completed, an inscription will appear in the flasher "PASSED". Now you need to disconnect the phone from the computer and reconnect the battery. As a result, we get a phone without being tied to an operator and MTS applications.
MTS Smart Start 3- another branded smartphone from the MTS operator. While waiting for Smart series smartphones, you always expect to get an interesting smartphone for the minimum amount. But when it comes to shopping and you spin it in your hand, an inner voice says, or maybe wait, maybe the next one will be the real expectation. But, unfortunately, this time no luck. It is super-budget from the Chinese manufacturer ZTE.
Powered by Android 5.1 Lollipop, quad-core Spreadtrum SC7731 processor clocked at 1.3GHz. RAM is only 512 MB. The amount of built-in memory is 4 GB, there is also an expansion slot for microSD cards. Touch screen with a resolution of 480 x 800 pixels and a size of 4 inches.
Like all smartphones in the Smart line, they are designed to work on the network only by the MTS operator. But the smartphone maker, in this case ZTE, retains the ability to fully unlock to use SIM cards from any carrier. Unlock code for mts smart start 3 you can purchase on our website in any quantity.
Characteristics of MTS Smart Start 3
Operating system: Android 5.1 Lollipop
CPU: Spreadtrum SC7731
CPU frequency: 1.3 GHz
Screen diagonal: 4"
Screen resolution: 480 x 800 pixels
The amount of RAM: 512 MB
Built-in memory: 4 GB
Maximum memory card size: 32 GB
Battery capacity: 1400 mAh
Waiting time: 200 h
Talk time: 7 h
USB Charging: Yes
Reset MTS Smart Start 3 hard reset
1. Turn off your smartphone
2. Simultaneously press the " Inclusion"and then a second later the button" Volume -"
3. As soon as the MTS logo appears, release the button " Inclusion".
4. An android with an open belly and an exclamation mark will appear on the screen, release the button " Volume -"
5. Hold down the " Inclusion" and without releasing press " Volume +". You should have a standard recovery menu
6. Use the volume buttons to select " wipe data/factory reset" and confirm with the button " Inclusion"
7. In the next menu select " Yes -- delete all user data" and confirm the selection with the "Power" button
8. Then from the main menu select " reboot system now"
Unlock MTS Smart Start 3
1. To receive an unlock code, you will need to tell us the IMEI number of your device. You can see the IMEI of the phone on the sticker under the battery or by entering the combination on the tablet: *#06# .
2. Pay for the goods (if you pay through an external payment system (marketplace) and upon completion of the payment you will see a button "Back to merchant site"- do not forget to click it), after making the payment you will see a form for entering data (IMEI), carefully enter them or leave a request on the forum
3. After that, after a while you will receive a code.
4. Insert a SIM card of another operator and you will see the following request on the screen: SIM card is blocked. Enter the UNLOCK code to unlock. Remaining attempts: 100")
Branded phones distributed by telecom operators are tailored for subscribers of selling companies, so they will not work with a SIM card of another operator. To use the phone without restrictions, change the firmware of the MTS Smart Start 3 smartphone.
An inexpensive smartphone with a plastic case, Internet support and built-in Wi-Fi, which is not distinguished by high performance. It is stitched specifically for MTS, so subscribers of other operators cannot use it without prior flashing.
- Works on the operating system Android version 5.1;
- Camera 2 megapixels, front - 0.3 megapixels;
- Screen diagonal 4 inches;
- Internal memory is 4 GB, but expandable through support for microSD memory cards;
- Bluetooth, GPS, 3G.
With such characteristics, it may not make sense to bother and unlock the MTS Smart Start 3 phone, but for those who have their own motives for such an act, we have prepared moderately detailed instructions on how to do this.
Where to download firmware for MTS Smart start 3 phone
If firmware from other gadgets is suitable for some smartphones, then this does not apply to Smart Start - an individual firmware file is required. You will have to choose between the official version of the Android manufacturer and custom MTS firmware. The first one is preferable because it contains root, i.e. eliminates operator restrictions. You can download both versions for free on the net if you search well.
In no case do not install broken firmware - there will be no problems in terms of technology, moreover, there is a possibility of personal data being stolen by intruders. Do you need it?
Smartphone MTS Smart start 3: firmware for all operators
To unlock your smartphone, find and download the firmware by unpacking the disk at the root. The main requirement is the absence of Russian characters on the way.
The operation will take about 10 minutes. At the end, a red bar will run, then a yellow bar, and then you will see a window with the inscription “Download ok”. Done, the smartphone is flashed.
How to unlock an MTS Smart start 3 phone if you forgot your password
We figured out how to reflash an MTS Smart start 3 phone, now we will solve simpler tasks. Have you thought of a security PIN code and then immediately forgot it? Restore access to your device in just a few minutes.
An extreme way to restore access to the phone is to reset the settings. You will return access, and the information on it will disappear without a trace. Hold one of the listed combinations on the switched off device to get into Recovery. Move up and down with the volume buttons, select wipe data / factory reset / yes / delete all user data, then reboot the device by pressing Reboot.
Smartphone MTS Smart Start 3- another branded smartphone from the MTS operator. While waiting for smart series smartphones, you always expect that you can get an interesting smartphone for the minimum amount. But when it comes to buying, and you twist it in your hand, an inner voice says, maybe wait, maybe the next one will be the same expectation. Unfortunately, this time too, no luck. MTS Smart Start 3 is an ultra-budget smartphone from the Chinese manufacturer ZTE, in the manufacturer's classification it is listed as ZTE Blade L110. In communication stores, MTS is sold at a price of 2490 rubles, of course, this is a tempting price. But let's figure out what they want to sell us for this money.
MTS Smart Start 3 runs on Android 5.1 Lollipop, a quad-core Spreadtrum SC7731 processor with a clock frequency of 1.3GHz. RAM is only 512 MB. The amount of built-in memory is 4 GB, there is also an expansion slot for microSD cards. Touch screen with a resolution of 480 x 800 pixels and a size of 4 inches.
The smartphone has one slot for SIM cards, supports 2G and 3G communication standards. In 2G networks it works in the following frequency range 850, 900, 1800, 1900, in 3G networks - 900, 2100MHz. Initially, the smartphone is designed to work with SIM cards only from the MTS operator.
The smartphone is equipped with two cameras main 2 megapixels, front - 0.3 megapixels. The main camera has an LED flash.
MTS Smart Start 3 is equipped with a GPS module, Bluetooth 2.1 EDR, Wi-Fi, accelerometer, proximity sensor, display orientation sensor, light sensor, etc.
The body of the smartphone is made of plastic, the overall dimensions are 65X125X10 and the weight is 110 grams.
The rechargeable battery is used with a capacity of 1400 mAh, according to the manufacturer, it should provide continuous talk time for 7 hours and standby time for 200 hours.
What we end up with is that the MTS Smart Start 3 smartphone was launched on the market in 2016, but according to its characteristics, it is in 2013-2014. A mediocre camera and only 512MB of RAM, not to mention the screen size. It is clear that everyone is now striving to reduce costs and, after a jump in the dollar, to reduce this factor in the formation of value, but in the end the end buyer remains with the nose. This is an entry-level smartphone, and is suitable for both schoolchildren and the elderly as a device for calls and sending SMS, and using the phone for games is very doubtful. Although this aspect will be covered in the review, the video for which you will find at the end of this page.
Unlock / unlock MTS Smart Start 3
MTS Smart Start 3, like all smartphones of the smart line, is designed to work in the network only of the MTS operator. But the smartphone manufacturer, in this case ZTE, retains the standard ability to unlock the phone to use SIM cards of any operators. To display a window asking for an unlock code, just insert a SIM card of a "foreign" operator and turn on the smartphone. You will see the following request on the screen: SIM card is blocked. Enter the UNLOCK code to unlock. Remaining attempts: 100
1. To get the unlock code, you need to know the IMEI, just dial *#06#.
2. Knowing IMEI, we proceed to the purchase of goods: Unlocking the MTS SMART Start 3 phone. Code. .
2.1 Immediately after payment, a form will be available to you to fill out. If the form does not appear, for example, you did not click on the link "
