I found my device! Instrument search with x terra 705

The Minelab x-terra 705 metal detector is a professional-level device produced by the Australian company Minelab, which is widely known for its finest feature: it primarily relies on new technologies and developments, making searches as convenient and efficient as possible.

This company arose after the first wave of similar American firms, and quickly took a place among the leaders due to the quality and huge success among users of metal detectors produced.

The Minelab x-terra 705 metal detector has replaced the Minelab x-terra 705, has been more developed and improved. So, let's take a look.)

Minelab x-terra 705 is a detector for search professionals, developed using digital technologies and intended primarily for the search for jewelry and coins. It is also not bad in detecting WWII items at great depths.

Let's start with the frequency. It is adjustable, has 3 levels: 3 kHz, designed to search for objects hidden deeper, 7.5 kHz is a universal frequency, suitable for searching for jewelry and coins, and 18.75 is a serious frequency that allows you to find as many coins as possible, however requires special equipment. So, let's see how these parameters affect the search depth: for coins it is from 21 to 37 cm, for larger objects, a maximum of 1.8 m.

In addition to the main coin search mode, the device has a discrimination mode, which provides for the presence of 28 sectors. This is a huge plus if you are going to search in high pollution conditions. Also, the developers have improved the device with automatic and manual ground balancing, if it is highly mineralized, which significantly increases the possibility of search productivity.

It is worth noting also a wide range of sensitivity, it has 30 marks, but remember to set it carefully, do not forget about the interaction with discrimination.

Not to mention the pint point mode, which is responsible for more accurate target detection.

He has another useful function in the filling - detuning from electrical interference, which is very useful in certain conditions.

Let's take a closer look at the control panel. It is equipped with a liquid crystal screen, and special control buttons, the functions of which are easy to figure out, guided by the instructions. It should also be noted another advantage - the built-in backlight. The find notification is displayed not only on the screen, there is also an audible signal, the volume and number of sounds of which are easily adjustable. Of course, the use of headphones is also provided.

This detector is very easy to use. It weighs just over 1.3 kg and is powered by a set of 4 AA batteries.
The price of the Minelab x-terra 705 device is in the middle price range and, in my opinion, is quite justified. The device can be bought profitably on the website http://mdregion.com.ua/catalog/gruntovye-metalloiskateli-minelab/x-terra-705. For more information, please contact the store staff.

Characteristics

Equipment

With the purchase of this detector you will receive:

• Metal detector control unit,
• Coil 10.5” DD 7.5 kHz. or 9” MONO 7.5 kHz
• 10.5” coil guard or 9” coil guard
• lower bar,
• Medium bar,
• top bar,
• upper armrest,
• lower armrest,
• armrest strap,
• Bolt for fixing the armrest,
• Bolt for mounting the control unit,
• Velcro fastener 2 pcs.
• Bolt with nut for fastening the coil,
• Rubber washers for mounting the coil - 2 pcs.
• Instruction in Russian.
• Warranty card.

It is also necessary to specify the coils suitable for the metal detector:

mono coils:

6" 7.5khz round

6" 18.75 kHz (high frequency sniper) round

9" 3 kHz - deep mono, rarely used

9 "7.5 kHz - standard coil of T34 and T305 devices

9 "18.75 kHz - high-frequency concentric (super for searching for shallow small targets).

DD coils:

10" 18.75 kHz ellipsoidal

10.5 "7.5 kHz - standard coil 505, 705.

10.5" 18.5kHz - high frequency small target search coil

Article about comparing DD coils 7.5 kHz and 18.5 kHz

15" - people call such healthy coils a "steering wheel", now they are produced by Koiltek, Mars MD.

Advantages and disadvantages

What can be said about the advantages of this device. Without undue modesty - they are full. An excellent set of functions, a fairly simple menu make searches even more productive and enjoyable. The metal detector is ergonomic, easy to use, which is ensured by its lightness and well-thought-out power supply system, which provides a fairly long time of continuous operation. It is also necessary to emphasize the popularity of the manufacturer's brand.

Now for the shortcomings. After studying a lot of reviews, we can conclude that most searchers have encountered such problems:

- lack of water resistance of the daughter coil;

- discrepancy between the coils from the kit and the capabilities of the device;

- overcharge;

- the fragility of individual parts (armrest for example).

It is impossible not to write about one more problem: there were isolated cases when there were problems with the sensitivity settings, but I repeat, there are only a few such reviews, most likely the cause of the device malfunction was unreliable suppliers, or getting on fakes, but again, it is difficult to judge this. Regarding the coils - you just need to replace them, but it will cost a pretty penny, and about the price - the name of the company, guys. Well, a quick breakdown of individual parts of the case designed to carry the device is already a matter of accuracy in the use of each user.

In general, the device is excellent, its use will give you only pleasant emotions, and the search will be more than successful.

The Minelab X-Terra 705 metal detector carries on board all the necessary functions for searching in any area and at any level of experience in the field of treasure hunting. The manufacturer combined in one device the advantages of the previous models of the Minelab X-Terra line (305 and 505), which have long been loved by many search engines around the world.

Main advantages:

Nimble microprocessor

4 search programs

Multi-segment discrimination scale

Precise digital target ID

Detuning from power lines and other electromagnetic interference

Ground balancing

Geo-search mode

Convenient interface

Ergonomics

Now let's take a closer look

why buy Minelab X-Terra 705 metal detector

Illuminated control box

A wide monitor is the first thing that catches your eye on the control unit. All information is displayed in bold and large print. The anti-reflective coating and excellent viewing angle allow you to work on bright and sunny days, and the display backlight will add confidence in the dark. Many search engines like to navigate by ear, but it is much more reliable to combine sound and numbers!

It is comfortable to work with large touch buttons even when wearing gloves. For quick memorization, all keys are labeled with intuitive icons. All manipulations are quite convenient to perform with the thumb of the working hand, without much distraction from the search process.

Manual and automatic ground balancing

The first thing every treasure hunter does when he arrives at the area is to build up from the ground, otherwise the search efficiency will be much lower. You can carry out soil balancing in the Minelab X-Terra 705 model in manual and automatic modes.

Automation is indispensable where the search is carried out in "difficult" conditions (mineralized soil, salt, etc.). Ironically, it is minerals, "hot stones" and other decoys that are the companions of native gold. Auto-tuning the ground will exclude the response of the device to something other than really valuable and ancient artifacts.

No electrical interference

The Minelab X-Terra 705 metal detector can be considered one of the quietest devices. No "mumbling" from various electrical interference! The search can be carried out both under power lines and next to other metal detectors. Praise to the manufacturer that he added an excellent processor to the fast processor. modern technology VFLEX, which "silences" extraneous sounds, making the search process better.

Fast wiring, accurate target identification and no extraneous sounds or interference - isn't this the dream of every treasure hunter? In addition, it is this function that allows you to enhance the performance of the device by providing it with an additional coil with a different, higher operating frequency.

28 elements of discrimination in Minelab X-Terra 705!

Although the vast majority of treasure hunters love to work with the All Metal mode, it is impossible not to note the discrimination in the Minelab X-Terra 705 detector. The discrim scale is represented by 28 segments. 4 segments belong to ferrous metal, the remaining -24 go to non-ferrous metals. Orienting to dig or not to dig is easy enough.

However, do not forget that working with a discriminator also requires certain skills and experience. Missing good targets is the norm for a beginner searcher. The key to high-quality search is high sensitivity and search with a disabled discriminator, but this comes with time.

PinPoint Mode

The built-in PinPoint program, marked on the block as a target, is responsible for the precise localization of the target. When a find is found, this function will help to accurately determine its location so as not to waste time and not damage a valuable artifact with a shovel.

Geo-mode - collect everything to the last grain!

Plowing up scales, small grains of gold, jewelry, small ancient relics and old coins - nothing will be left in Geo-mode after Minelab X-Terra 705! Many people think that this mode is suitable only for searching for native gold. But in vain!

Pre-Peterovsk sites and beaches are cleaned in this mode. The difficulty lies in mastering this function - it is too hard to listen to the device. The display in Geo mode is useless - only hearing and slow wiring.

Polyphony or Monotone? The choice is yours!

Look at the monitor or listen to the sound - each search engine decides for itself. In the Minelab X-Terra 705 metal detector, you can adjust the sound tone for yourself and your preferences.

Is it habitual to work in one tone? Please: one tone, two, three, four. Do you prefer a variety of sounds to hear all the nuances? That's polyphony for you! The volume is also adjustable. There is a headphone jack, which is indispensable in windy weather.

Buy 1 get 3!

The main advantage of VFLEX technology is that the signal is generated not in the control unit, but in the coil! So when you change the coil, the capabilities of the device also change! The Minelab X-Terra 705 metal detector, thanks to a variety of coils, is able to operate at 3 different frequencies:

3 kHz for searching at maximum depth

7.5 kHz universal frequency for most search locations

18.75 kHz only small targets for clearing the area

Ellipse or circle, mono or DD - a variety of coils of different sizes are suitable for the device, so that the searcher has a variable metal detector for different types of search and for different terrain.

Economy and ergonomics X-Terra 705

The detector is powered by 4 AA batteries or rechargeable batteries. The Minelab X-Terra 705 metal detector is equipped with an internal power regulation circuit that does not reduce the detection depth when the battery is gradually discharged. High-quality work of the metal detector is guaranteed until the batteries are completely discharged.

The device has a familiar and convenient S-shaped design. The bar is adjustable for any height and securely fixed in the selected position. The arm rests perfectly in the armrest socket and is secured with a Velcro strap.

Conclusion: if you buy a Minelab X-Terra 705 metal detector, the treasure hunter is unlikely to think about changing the device in the future. Advanced functionality, the possibility of individual settings, excellent discrimination and universal search modes - what else can you want from a metal detector? It does not matter what is "found" in the ground: ancient coins, ancient relics, gold nuggets or modern "lost" - with the Minelab X-Terra 705 model, every target will be found!

Equipment:

metal detector

Waterproof coil 10.5" DD 7.5 kHz

Coil protection

Mounting kit

User guide

Warranty card

You can buy a Minelab X-Terra 705 metal detector in our online store by placing an order by phone, through a shopping cart or using a quick order. Qualified staff will give a full consultation on the product, as well as answer all your questions.

The Minelab x-terra 705 metal detector is the recognized flagship of the entire line of terra series devices. The updated version of the previously popular Model 74 includes many improvements designed to further increase the search efficiency and usability. Photo of now my "true friend":

Characteristics

3 operating frequencies:

3 kHz - for searching at depth (very rarely used)

7.5 kHz is the standard search frequency, it can be called universal, since most often they search for coins and treasures on it.

18.75 kHz - high frequency, ideal for searching for small targets. Of course, appropriate search coils are needed, operating at this particular frequency.

By the way, now you don’t need 2 coils, it’s enough to buy from the Mars MD company. So far, there are 2 katuhens for sale - a 15" Goliath handlebar and an ellipse Mars Tiger. The coils are very cool, I recommend.

Discrimination Scale:
It has 28 segments, with a step of 2, from -8 to +48 (4 segments are allocated for ink and 24 for flower beds). As you can see, there are more segments when compared with (there are 19). The more segments - the better you can cut off unnecessary signals, respectively, the search efficiency can be increased.

Discrimination masks - increased to 4 + spec. iron mask.

Ground setting of the minelab 705 metal detector in 2 versions - manual and automatic. So, the first difference between minelab 705 and minelab 505 is the presence of automatic tuning in 705. Automatic ground tuning is recommended when searching on highly mineralized soil, where there are a lot of stones or wet sand. According to experienced search engines, automatic tuning significantly reduces the detection depth of the device, so if soil changes are not noticeable at the search site, then it is better to use manual tuning. Although I don’t worry and go to the automatic and there are always finds))

There are built-in standard ground adjustment programs such as "beach", "auto", "auto+tune". The main difference between the T74 and the 705 is the ground tracking mode..

Manual adjustment to the ground - using a special scale from 0 to 90, you can adjust your device to the ground as efficiently as possible. Of course, you will not manually sort through the entire scale, because there is a special "automatic" balance selection for this, which will select the most preferred option on its own, and you will only have to adjust it to your needs.

As you already know, with a strong mineralization of the soil, detectors with manual ground adjustment react to stones as if they were a good, colored target. No matter how hard you try, you still won't be able to debug your manual instruments from "hot rocks" (as the instrument's reaction to strong mineralization is called). At the same time, the detection depth drops significantly and does not exceed 10 centimeters. Therefore, automatic ground control + ground tracking is sometimes just an indispensable function. Of course, you will not dig in such areas often, but if you suddenly have to, you will be glad that you bought the 705th model from the Terr line.

Sensitivity adjustment(chuyka) - from 0 to 30, it is recommended to set the maximum chuyka in fields where there is no metal debris and soil mineralization. The detection depth is noticeably increased. In other cases, the setting of the "sense" of the minelab 705 is done by trial and error, depending on the place where you are searching.

There is a detuning from electrical interference and other metal detectors, the options are automatic or manual.

Metal type recognition by sound - 2 options: mono and polyphony. Mono - 4 tones, polyphony - 99 tones. If you change the minelab 305 to 705, then out of habit you set it to mono, but I dare to assure you that polyphony eventually helps to reach a completely different level when searching for coins, so immediately start searching for polyphony. At first it will be difficult to get used to, but after a while you will feel the difference.

The metal detector has tonal background", with which you can easily cut off rusty iron, reeking of color. If you have ever dug rusty rings from barrels, you will understand what I'm talking about. A clear color signal, great depth, you think - here it is, a treasure, however, a gap a huge pit, disappointment awaits you.
what they were looking for with a metal detector that did not have a "tonal" background.

There are also useful features such as:

1. Pinpoint (target centering) - here it is worth noting that a super-duper function for determining the size of the target has been added.
2. Display illumination.
3. Target depth indicator.

Depth of detection metal detector Minelab x-terra 705

As seasoned diggers say, the 705 hits deeper than the 505, but it's all relative. After all, the depth strongly depends on many factors, these are the settings, the level of "feeling", the condition of the soil (mineralization, salt), the type of coil, the frequency at which you are looking. There are many factors, but for a rough estimate of the depth of detection, we will publish the results of air tests of the model 705. Tests with a standard coil 10" DD 7.5 kHz.

Soviet penny - 18 cm.
Soviet penny - 35 cm.
Pyatak Catherine - 42 cm

Geo-mode in the model terra 705 (Prospector)

The new model adds a geo-mode that will take your search engine skills to the next level. What is the geo-mode on terra 705 and why is it needed - such questions can be found on every forum of treasure hunters. We answer - the geo-mode helps to significantly increase the depth of detection. In addition to depth, small targets are "seen" better. Initially, the geo-mode was created to search for gold nuggets. However, gold is not mined in our area, so we have to adjust the geo to the needs of ordinary diggers.

As they write on the forums, for a squeak in geo mode, an individual approach is needed. First of all, you need to look at the ground - the geo-mode is designed to search on highly mineralized soil. Diggers write that when searching in this mode, the device "takes" very deep, but there are problems with discrimination, because at great depths small iron targets are given to non-ferrous metals and you yourself understand that digging nails from 40 cm is not very desirable. You also need to use various search coils, both mono and DD, work at a high frequency. Only then will the depth of detection be simply phenomenal.

Here's a clipping of what diggers have to say about Geo mode. Taken from kladtv.ru.
How to increase the sensitivity of X-Terra 705 and X-Terra T74 by 2 times. It seems that the owners of X-Terra 7 series metal detectors do not use, and many do not even know about the existence of the GEO mode, or as it is also called Prospector. But in vain! This mode doubles the sensitivity and detection depth of the metal detector. DOUBLE!!! To enlarge
depth by 2 times, it is enough to press one key "GEO" in the T74 model or in the 705th key "with a pick". For example, in my test, the depth of detection of scales in normal mode with a 7.5 kHz coil is 14 cm, and in GEO mode with a 18.75 kHz coil it is 22 cm. This is almost twice as much! For even more depth, set the MONO coil to 18.75 kHz, specifically mono, it gives more depth by 10% than a DD coil with the same frequency. Lord! Study the mat part.

Which coils can be used on the terra 705 metal detector.

mono coils:

6" 7.5khz round
6" 18.75 kHz (high frequency sniper) round
9" 3 kHz - deep mono, rarely used

9 "18.75 kHz - high-frequency concentric (super for searching for shallow small targets).

DD coils:

10" 18.75 kHz ellipsoidal
10.5" 7.5 kHz - standard coil 505, 705.
10.5" 18.5kHz High Frequency Small Target Coil
Article about
15" - people call such healthy coils "steering wheel", now they are produced by Coiltek, Mars MD.

In general, the Minelab terra 705 metal detector is an excellent device that has proven itself when searching for coins and treasures in fields and forests, while searching attic and beach. Of course, you can always conduct an effective search only if you have several search coils of different sizes and frequencies. However, for a standard search for coins and treasures, the standard equipment is optimal. Maybe in the future buy, for example, an 18.5 kHz high-frequency coil in order to increase the number of "small" finds. Well, dig more often, study the device, especially the "geo-reconnaissance" mode, and the number and quality of finds will steadily increase. Luck with searching. Well, isn't it a handsome device?

If you are looking to buy a new metal detector and improve the accuracy and efficiency of your searches, the Minelab X-Terra 705 might be a good choice. The detector has a high average rating, and almost all reviews about it are positive. What is Minelab X-Terra 705? Reviews, photos, characteristics - everything is further in the article.

Functional features

This is the third metal detector in the Minelab X-Terra range after the 305 and 505. Just like its predecessors, the 705 comes in multiple parts, making it easy for owners to assemble and disassemble within minutes. The stem is divided into three parts that fold together precisely and securely. A coil is attached to it with a plastic wing nut, and the control panel at the top of the rod is attached with a corresponding bolt. On the side of the panel, with a slight movement of your finger up, the cover shifts and opens access to the battery compartment. The detector is light and compact, and its black finish with a silver-blue control panel gives it a stylish look. The device weighs about 1.3 kg and has a minimum length of 1.22 m and a maximum length of 1.42 m.

Instruction

Acquaintance with the user manual is the first thing that is strongly recommended to be done at the beginning of work with "Minelab X-Terra 705" reviews. The manual provides comprehensive information about the principles of operation of the metal detector, its assembly procedure and control keys. It provides information on using and setting the discrimination scale, methods for determining the exact position of the target, adjusting the sensitivity of the device, methods for detuning from interference, how to adjust the threshold tone, volume, sound frequency and ground balance. What you read should be applied to specific conditions, understand how each setting affects search results, and learn what needs to be done to achieve maximum efficiency.

innovative technology

What are the most impressive features of Minelab X-Terra 705? Owner feedback indicates that V-Flex technology, by preamplifying the detected signal, has significantly reduced the number of false positives from interference induced on the cable connecting the coil to the control panel.

V-Flex technology is a hallmark of the metal detector. Reviews of the "Minelab X-Terra 705" speak of the ease with which you can change the frequency of the detector by replacing its coil. Minelab offers several large, medium and small coils, eliminating the need to purchase any other metal detector. The ground balance is much better than the 705's predecessors, making it easy to use even when working in high mineral areas. As a result, searchers have the ability to find items that previous models could not find, and work in conditions where most other brands of detectors are powerless. But best of all characterize "Minelab X-Terra 705" reviews. The manufacturer, according to the owners, has provided accurate digital coil calibration, frequency adjustment and constant monitoring of the soil, which allows to achieve high performance in a wide range of search target types and ground conditions.

Battery charge status

Users recommend first of all to make sure that the batteries are capable of providing a sufficient duration of operation of the device. The metal detector is powered by four AA batteries with a voltage of 1.2-1.5 V. The indicator does not accurately reflect the initial charge level. The owners advise letting the device run for a few minutes, and only then check the readings - this way they will be much more accurate.

Noise cancellation

The metal detector has five channels, between which you can switch both in manual and automatic mode. Users recommend using the latter option, since the device is much more accurate in setting the level of interference sufficient for operation than a person. In this case, the coil must be in a horizontal working position and away from metal objects.

Threshold

Threshold level adjustment is from -5 to 25. This setting is very important and depends on the user's hearing and ambient noise. Owners recommend setting the tone level until a barely audible sound is achieved. Too loud sound will be distracting and will not allow weak signals to pass the threshold. Too quiet will lead to the same result.

Tracking mode

In this mode, the ground balance constantly adjusts to changes in soil composition. This means that you do not need to install it before starting to work with the metal detector, as the adjustment will occur automatically after a few sweeps of the metal detector. After that, you can either save the current value of the parameter by pressing the tracking key again, or continue working in the current mode. It must be remembered that several passes over the target may result in blocking signals from it, and not from the ground. Therefore, it is recommended to exit this mode after signaling the detection of a target.

Tracking Ground Balance

Many experienced metal hunters prefer to use slightly off ground balance detectors. Previously, they could not do this automatically. But with the Ground Balance tracking feature, users can now automatically adjust sensitivity between +15 and -15, making it possible to use the detector in soils that used to be difficult.

pinpoint

Pinpoint mode allows you to set the target size by adjusting the sensitivity and examining the area around the target. You can also use this function to manually control the detection mode.

Beach Ground Balance

This feature improves the accuracy of the detector when hunting on the beach. This helps improve ground balance in high mineral areas and is excellent at filtering out signals from near-non-magnetic materials.

Five presets

The metal detector comes with five preset patterns.

• Scheme 1 can be used when searching for non-ferrous metals such as precious metals, silver and gold.
• Scheme 2 is designed to reject materials such as foil and detect non-ferrous metals.
• Pattern 3 is used to receive signals from small iron based items and is generally recommended for relic hunting.
• Pattern 4 discriminates against most ferrous metals.
• Scheme 5 allows you to search for any metals and their combinations.

On the right side of the screen, five arrows indicate the detection depth of the Minelab X-Terra 705 metal detector. Owner reviews say that although the indicator is able to indicate the maximum depth within 25 cm, which is 0-5 cm per arrow, the device confidently detects targets located deeper. Users report finds at a depth of 0.5 m and deeper. There are many factors that determine the depth of detection of the Minelab X-Terra 705. Owner feedback refers to parameters such as the distance between the ground and the coil, signal frequency, the degree of ground mineralization, the size of the object being detected, and the presence of metal debris.

Advantages

The LCD screen "Minelab X-Terra 705" reviews of the owners are called bright and easy to read. In addition, it is equipped with a backlight, which allows you to continue searching even after sunset. Coin and Treasure Detection and Exploration Modes are the two main modes of the X-Terra 705 that can be used to search for relics, jewelry, old and new coins. The metal detector rejects signals from targets such as bottle caps and aluminum can pull tabs. It can be used on beaches and parks.

Two modes of precise positioning

The device has 2 modes of positioning finds - size settings and automatic. While auto mode can be found in many detectors, pinpoint location is unique and provides useful information about the characteristics of a target, including its size and shape, accompanied by a graphical indication and variable tone.

Noise Cancellation provides excellent response speed where there is a lot of debris below the ground.

Iron Discrimination Masks adjust the filtering of signals from iron objects, so users are able to detect targets even if they are close to debris.

A 28-segment discrimination scale (4 for ferrous and 24 for non-ferrous metals) indicates iron content and conductivity levels. The numeric ID range is -8 to +48 steps. A large number of target segments makes it possible to better detect small differences in the composition, as well as improve the accuracy of determining the target that the user wants to reject or detect.

"Minelab X-Terra 705": reviews. Characteristics

X-Terra 705, as expected, did not break the tradition of the manufacturer and deserves a very good rating. The constancy of the device in finding and identifying targets is commendable. In addition, the detector consistently filters non-ferrous signals even in the most clogged search areas. Two basic presets and extensive options for setting up the device enable the user to search efficiently. The general opinion of the owners is that the manufacturer should consider saving the edited presets when turned off and even if the batteries are replaced.

Metal detector "Minelab X-Terra 705" user reviews call it a convenient and very easily interpreted model. Like all detectors in the X-Terra range, it is high end and not only looks good but performs well beyond what is expected. The quality of the metal detector indicates that it reflects the latest research and development. When such a reliable device appears on the market, it becomes the benchmark for other detectors. And confidence in your metal detector is undoubtedly one of the most important aspects of searching for both the complete novice and advanced user.

"Minelab X-Terra 705": reviews, description

When assembled, the metal detector looks and feels solid: nothing will break or shatter in the field. As with previous models, the instruction manual is clearly written. The layout of the keyboard is practical and ergonomic. Field testing allows you to name a metal detector best model rulers.

Among the advantages of the Minelab X-Terra 705 detector, owner reviews call it compactness, light weight and durability, excellent performance in mineralized and trashy areas, significant detection depth, a large number of functions to improve search results, a bright backlit LCD display, the ability to use for beginners and experienced metal hunters alike, replaceable coils, impressive battery life.

Among the shortcomings of the Minelab X-Terra 705, user reviews highlight the limited water resistance of the coil to a depth of 1 m, the lack of a 3 kHz frequency, and the absence of batteries and headphones in the kit.

Conclusion

Whether the user is a beginner looking for an easy-to-use detector or an experienced hunter looking for advanced features, the Minelab X-Terra 705 metal detector is called a good choice for everyone by owners. Despite the many additional features, the principle of its operation is easy to understand and apply. In addition, the price of the device makes it one of the most affordable metal detectors that have such an extensive arsenal of increasing accuracy.

Specifications

Below are the main parameters of the device:

• Coil frequency 3, 7.5 and 18.75 kHz.
• VFLEX technology.
• The screen is translucent LCD (3"x1.75") with backlight.
• Target selection: relics, coins, jewelry, gold and the beach.
• Ground balance: tracking, manual, automatic, beach.
• Sensitivity adjustment - manual.
• There is a volume setting.
• Coil 10x5 inches, replaceable.
• Battery - 4xAA.
• Weight - 1.3 kg.
• Opening hours - 20-30 hours.