Samsung galaxy phone flashing. Flashing Samsung Android devices using Odin. Possible problems installing Recovery
Instructions for installing the official single-file firmware on Samsung Galaxy S3 (GT-I930x).
Drivers and programs
Attention!
To install the official stock firmware on the Galaxy S3 and return the phone state ("Settings"> "About device"> "Properties"> "Device status") to "Official" after switching from custom firmware and thereby return the ability to receive updates over the air, it is enough follow the instructions provided.
Installation instructions
Unpack the downloaded archive into the Odin PC folder for convenience. The file in the ".tar" or ".tar.md5" format must be kept and "SS_DL.dll" can be deleted.
Reset device data.
To do this, go to the settings on the tab “ Accounts"In the section" Archiving and reset", Select the item" Reset device"And press the button" Delete everything". The phone will restart.
Run Odin PC as administrator.
Put the device into download mode ( Download Mode).
To do this, you must simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone restarts and accept the warning by pressing the Volume Up key.
In this state, connect the smartphone to the computer. Odin should light up the inscription “ COM».
Press the button " AP»And select the TAR-archive of the firmware.
Items " Auto reboot" and " F.Reset Time" must be activated, a " Re-Partition", If active - must be disabled.
Press the button " Start". The process of installing the firmware will begin.
At the end of the operation, if everything went well, the message “All threads completed. (succeed 1 / failed 0) ". The phone must be rebooted manually by holding down the power button until the screen turns off. The device may take up to 5 minutes to boot up for the first time.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from the recovery.
To do this, simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select the item " Wipe data / Factory reset", and then - " Reboot system now". If after these steps the device also freezes at startup, you need to reflash it again.
amsung, it is important to familiarize yourself a little with the device itself. So you can find out some useful things that you did not even know about before. Therefore, let's take a short excursion into the cosmic world of Samsung Galaxy devices - such as n9005 Note, n900, S3, N7100 and others.
Galaxy devices are very popular, stylish and high-quality gadgets.
The Samsung smartphone market today accounts for an impressive share. The mobile giant in the modern world is the biggest competitor for another popular company that even kids know about - Apple. And this is no coincidence, because Samsung presents to the public a large number of a wide variety of devices in all possible price categories. This, in principle, gives the company a certain advantage - the availability of devices for all segments of the population. If a person cannot afford a smartphone for 20,000 rubles, but he needs modern functions, then some of them can be provided by budget models. And Samsung is doing quite well in this regard: the company's devices in the budget price segment have a large number of necessary functions in their arsenal.
The most popular are the Galaxy series models. They include both premium smartphones S, S Edge, Note and more affordable ones - A, Grand, Grand Prime and others. How do these devices differ from each other?
As you know, Galaxy S and S Edge are the company's top smartphones, which are released every year with new characteristics, functions and features, receiving a new number in the name (the latest version of the series is the seventh). Note is positioned as a tablet (quite a popular word today), a device for business people or creative people. For those who constantly need a large screen, the main feature of this device is the S Pen, which allows you to create quick notes, sketches and other types of handwriting directly on the screen in various applications.
Grand and Grand Prime are positioned in the segment of budget smartphones as the most popular. And this is no accident: the devices have two cameras - front and main, a touch screen, support for high-speed networks, access to the global network, the ability to install almost any program (except for complex games and applications) and use them.
Naturally, far from all available Samsung mobile devices have been named above.
What do you need to know before flashing a smartphone?
So, if you are going to do this difficult task, then we hasten to please you. Because any person can flash or reflash Samsung Galaxy (such as n9005 Note, n900, S3, N7100 and others). To do this, you just need to familiarize yourself with the initial data, some features and, most importantly, follow the instructions.
What might you need before embarking on your mission?
- The Samsung device itself with a charged battery (at least 80 percent). This is necessary for the unexpected stoppage of the device and further program failures.
- Original USB cable for connecting to a computer. The cord is supplied in the kit, but if suddenly you do not have it, then you can use the existing one. However, it is worth remembering that such actions are performed at your own peril and risk.
- Internet connection with unlimited traffic. You need this in order to download the firmware itself, which can weigh more than one gigabyte. In principle, tariffs with limited traffic may also work, if this does not give you any inconvenience. If you are unsure of what your tariff is, be sure to check this question with your Internet provider.
- Desire and patience that will become your faithful companion. You may not be able to flash or reflash your Samsung Galaxy the first time. Do not be upset in this case. Better try to carefully reconsider whether you did everything right and whether you could make a mistake somewhere.
What are the firmware methods?
You can flash your device (Samsung Galaxy n9005 Note, n900, S3, N7100 and others) using official Samsung tools or third-party utilities. Let's take a look at each of these values, then move on to their instructions.
- Firmware update with official software. This can be done from the smartphone itself, without using a computer, or with its help by directly connecting the device via the USB port. This is necessary for those who just want to update the version of the operating system, for example, from Android4 to Android 5.0.
- Flashing or flashing using third-party tools. The most popular service in this matter is the Odin program. It is easily installed on a computer or laptop and is provided to users free of charge.
Official firmware update
Without using a computer
- So, you decided to update the version of the operating system of your smartphone without any cords or other devices, but only by the device itself. Go!
- Initially, we connect to the Wi-Fi network. There is no point in going further without this. If there is no access to wireless networks, but there is a computer with access to the global network and a USB cable, then go to the next paragraph entitled "Using a computer".
- Now go to the "Settings" menu and find the item "About device". Here we will need a tab called "Software Update". We press the update button.
- If your smartphone says that updates have already been installed on your device, then there are no available firmware for your device. That is, the latest available version of the operating system is installed.
- Otherwise, you need to agree to download updates and wait for it to complete. When finished, click on the install button. After that, your Samsung Galaxy will start a system update, during which the device cannot be used. Under no circumstances turn off the phone, do not try to reboot it or remove the battery - you can get a "brick", that is, a completely inoperative device.
- Only when you see the familiar home screen and the message that you have successfully completed the firmware update procedure, you can use the device as usual.
Using a computer
- To work, you must have access to the Internet for a computer or laptop. Otherwise, you cannot do anything.
- Download the Smart Switch software to your PC from the company's official website (http://www.samsung.com/global/download/smartswitchwin/).
- Now we connect the smartphone to the PC using a USB cable and wait for the device to be found.
- The program itself will show you the availability of the new version of the operating system for the device in a special small window. If the outcome of the events is positive, the "Update" button will appear, which you will need to click on.
- It remains to wait until the download and installation of updates is completed. Installation can take a long time, so please be patient.
- As in the previous option, in no case turn off the device, do not remove the cord from the computer. Keep both your PC and phone running smoothly to avoid unexpected breakdowns.
- After a successful firmware update, you can continue to work with your smartphone as usual.
What should you know after flashing?
Samsung in its official manual (instructions) for upgrading the operating system recommends doing a data reset after such manipulations. Otherwise, Samsung warns of possible system malfunctions. This does not necessarily happen with your gadget, but you can take this into account if you find such problems in the further work with the phone.
However, it is worth remembering that before resetting, it is important to always save all existing data: photos, contacts, videos, music, documents. You can do this manually, by simply transferring information to your computer, or using the Smart Switch utility, which allows you to back up data from your Samsung Galaxy n9005 Note, n900, S3, N7100 and others.
Firmware using a third-party program Odin
First, familiarize yourself with the main points that in no case should be violated. You have been warned about this several times so that later you don’t grab your head and say to yourself: “What have I done?”. Therefore, it is better to play it safe and carefully watch what needs to be done and what you are doing.
- All operations you perform at your own peril and risk. This is the most important rule, because after flashing unofficially, you void Samsung's warranties.
- Do not pull out the power cord of the computer or laptop, that is, ensure the unconditional operation of the PC.
- Charge your smartphone at least 80-90 percent so that it cannot be discharged during the update.
- When connecting to a PC, use only the original cord.
Preparing and configuring services
As you may have noticed, these rules do not differ from the requirements for updating with official Samsung tools, so it will be easy for you to follow them. Now let's move on to the most important thing:
- First, download the Odin utility. It can be taken from the site (http: // androidpru / odin-firmware-samsung /).
- Now download the firmware file for your device to your computer. If you do not know where to do this, you can use the Samsung Firmware Linker program, which allows you to find and download the firmware specifically for your device.
- Download the driver for your device to your computer. This is necessary to correctly detect and configure the smartphone when it is connected to a PC. You can use the resource (http://androidp1.ru/drviver-for-android/).
- Be sure to save all important data from the device to any other medium just in case. Because when flashing, partial or complete loss of information from the gadget is possible.
- The preparatory work is over, and we are moving on to the main process. We transfer the phone to the firmware mode. If you do not know how to do this, then we try this option: turn off the device, hold down the volume down, center and lock (off) buttons at the same time. If it works correctly, you should go to a special menu, where using the volume up key you will consent to launch in firmware mode. If you did not get into such a menu, then find this information specifically for your device.
- If you succeed, you can connect the device to your computer via USB. Wait a while for the necessary drivers to be installed.
- After that, you can launch the Odin application on your computer. On the left in the corner, you will see that the gadget is connected, which means that we are moving on.
- Now you need to add the firmware files in the correct order. If for single-file firmware everything is very clear (insert the firmware into the AP or PDA field by clicking on the appropriate button), then you will have to tinker with multi-file firmware a little longer.
Multi-file firmware
Let's figure out which files and in which field you need to insert:
- PIT is inserted into the PIT field.
- tar.md5 - in BL or Bootloader.
- CODE_xxxxx.tar.md5 file - in AP or PDA.
- MODEM_xxxxx.tar.md5 file - in CP or PHONE.
- tar.md5 - to CSC.
Continuation
- Please note that you do not need to put any checkboxes on the left if the firmware itself does not provide for this.
- After correct placement of the firmware files, press the START button and wait until the program finishes. When finished, the word RESET or PASS appears on the left. The device will now reboot and be ready for use again. You can disconnect your smartphone from your computer.
Conclusion
If, after flashing or flashing your device, you cannot turn it on (the so-called "eternal reboot"), then try resetting. It is also known by its other name, Wipe. We hope that you can still get the firmware or flashing of your Samsung Galaxy n9005 Note, n900, S3, N7100 and others without any incident. Good luck, dear readers!
We continue the theme of experiments on my new phone. From the experience of using routers and other technology, I have developed a persistent habit - the first thing to do is to update their "brains". The thing is that from the moment the device leaves the factory until the time it gets into your hands, it may take more than one month, and during this time its firmware could undergo significant changes and open up wider possibilities of use for the user. And today we will clearly check how to flash a Samsung phone on Android 4.4 and how safe is it to do it yourself?
Methods for flashing a Samsung phone on Android 4.4
There are several ways to flash an Android phone. The first is directly from himself through the system. My Samsung was running Android 4.4, in which if you go to the section “Settings> About the phone> Software update”, you can set up automatic checking for new firmware for your model. To do this, check the box for “Auto update”. I also recommend activating the "Wi-Fi only" item, in this case the availability of a new version will be checked only when the phone is connected to a wireless network, otherwise it will constantly waste your mobile traffic through a cellular operator, which is fraught with loss of money.
The check can be started manually by clicking on “Refresh”.
You can start flashing a Samsung phone on Android, like any other, only when the battery is 100% charged.
However, this option for updating the Samsung Galaxy firmware is not entirely convenient and may fail in the middle, as happened with me. Therefore, I recommend that you perform this task using a special program installed on your computer, and with a phone connected to it via a USB cable.
There are also variations here - you can do it using the official Samsung Kies program, you can use the popular Odin or its equivalent. In the latter case, it is possible to use both the official firmware for Samsung phones on Android, and from third-party developers, which are often more convenient and open up more possibilities for the phone, but at the same time it flies from the factory warranty. Therefore, it is recommended to install third-party firmware only after the expiration of the warranty period.
How to officially flash a Samsung phone on Android?
So, we begin to figure out how to flash Android using the example of updating Samsung, and turn to the Samsung Kies program, which can be downloaded here. By the way, it was created by analogy with Apple's iTunes and with it you can fully synchronize your phone with a PC - contacts, files, music, etc.
Before you start updating Samsung firmware to a new Android, it is recommended to make a backup copy using your phone or via Kies to avoid possible data loss.
First, we install the program. At the same time, drivers for all kinds of devices from this company, including yours, will be added to the computer. We launch it, connect the phone to the computer via USB and wait until it is recognized.
Further, after the window with all the basic data about your phone opens, select "Firmware Update" and if there is one, this will be reported in an additional window that opens.
We press the "Update" button, agree with the rules and confirm our desire. And we are waiting for the end .. Do not touch the phone at this time and in no case disconnect it from the cable from the computer. By the way, I also do not advise you to leave for a long time, as your antivirus or firewall (firewall) may swear a couple of times, in which you will need to allow Kies to perform its functions. Also disable the antivirus on the mobile phone itself, otherwise it will not let the system update.
As a result, we get this and confirm the end of the software update.
Updating Android Firmware on Samsung Phone via Odin
Now let's turn to the "gray" firmware. I suggest watching a step-by-step video first, and then we will continue.
First of all, you need to put the phone into the “Downloading” mode, which is done by simultaneously pressing the key combination “Home”, “Power on” and “Volume minus” (or “Volume plus” depending on the model). If done correctly, the Android logo and an inscription about the boot mode will appear on the screen.
Next, download and install the Odin MultiDownloader program (it is easy to find it on any thematic site or google it in a search engine) - this is a professional program designed for service centers, so you can not be scared, if you do everything right in it, then nothing bad will happen to your phone.
And you will also need the firmware files that you downloaded from the official site or any forum for supporting third-party firmware. As a rule, there are four of them - PDA, the main firmware file; PHONE, which is responsible for working with the cellular operator's network; CSC - phone settings; and PIT - service information storage. Make sure they are all included in the kit. However, there are also single-file versions, in which case it will need to be imported in place of the main one - PDA.
If you are working on a computer with Windows 7 or higher installed, then this will be enough. If it's XP, then you will definitely have to install the Kies program that we have already disassembled, which will install drivers for your Android phone for Windows, or separately the firewood itself - Samsung USB Driver for Mobile Phones. On the same site, you can also pick up firewood specifically for your model and version of the computer OS.
Now you must first of all kill all Kies processes, if you installed and started it. To do this, press the Ctrl + Alt + Del key combination on your computer and look for processes whose names contain the word “Kies”. And we complete them. Then we launch Odin - our smartphone is already in boot mode - we connect it via a USB cable and press the “Volume up” button (for Samsung Galaxy S2).
Now you can start updating the software.
One (first) ID: COM section should be displayed in yellow in the Odin program (there are several of them for simultaneous work with several phones). In the program, check the boxes for “Re-Partition”, “Autoreboot” and “F.Reset Time”.
Now we press the “Start” button and wait for the process to be completed until the process graph reaches the end, it will turn green and “Pass” will appear.
After that, the phone will reboot and start working on the new software version. Additionally, to check the current version, you can use the command * # 1234 #. You can also make a complete clearing of all data using the service code * 2767 * 3855 #.
This completes the firmware of the Samsung phone based on Android OS, thank you all for your attention!
It is very easy to flash Samsung, but without knowing certain rules, you can get a great walnut-cracker smartphone! To avoid this, this article is devoted.
Where to download Odin?
You can download the latest versions of the Odin firmware on a special page of the site - Download Odin
Odin firmware samsung - rules
First rule what you should know that it is strongly not recommended to flash with the Kies program and here's why:
- Incompletely downloaded firmware from Samsung server.
- Poor smartphone firmware, as a result of which the smartphone constantly reboots (the / data section is not erased).
Second rule what you need to know, flashing only with Odin
Third rule, flash only with a charged battery on the smartphone and uninterrupted power supply on the computer.
Fourth rule Do not pull out the USB cable while flashing Android.
Fifth rule The USB cable must be original and not damaged. In recent years, it is very important to use exactly the USB cable that came with the phone, since when using non-original ones it is possible not to flash or break the device!
Sixth rule, the path to the firmware should not contain Russian-language folders (C: folder is not correct, C: or C: samsung - correct).
There are firmwares
Single file- consist of one firmware file
Two-Three-Four-Five-file(multi-file) - consist of more than one file
Firmware has the extension * .tar or * .tar.md5
Preparing for firmware
1. Download the official firmware
Where to download the Firmware
Or use a special utility that quickly downloads Samsung firmware to your computer - Samfirm instruction.
Firmware SER - Russia and CIS
Firmware SEK - Ukraine and CIS
Other regions - CSC(click on the spoiler)
Other regions - CSC >>>
Albania:
ALB
Algeria:
ALG
ALR
Argentina:
ANC
ARO
CTI
UFN
PSN
Aruba:
ARU
Australia:
OPP
OPS
VAU
XSA
TEL
HUT
Austria:
AOM
DRE
MAX
MOB
MOK
ONE
TRG
ATO
Baltic:
SEB
Belarus:
MTB
VEL
Belgium:
BAE
BSE
PRO
XEB
Bosnia-Herzegovina:
BHO
BHT
TEB
Brazil:
BTA
BTM
TMR
ZTA
ZVV
ZTO
ZTM
Bulgaria:
CMF
GBL
MTE
MTL
OMX
PLX
VVT
Canada:
RGS
BMC
TLS
Chile:
CHB
CHE
CHL
CHT
China:
CUH
INT
TEC
TIY
CMC
CHN
M00
Colombia:
COB
COL
COM
COO
Cyprus:
CYV
Egypt:
EGY
Finland:
ELS
SAU
NEE
France:
OFR
AUC
BOG
COR
DIX
FTM
NRJ
ORC
ORF
SFR
UNI
VGF
XEF
Germany:
DBT
DTM
DUT
EPL
MAN
MBC
VD2
VIA
XEG
Greece:
AOC
COS
EUR
GER
TGR
VGR
CYO
Romania:
PAN
VDH
WST
TMO
XEH
TMH
India:
Hfc
HYA
INA
IND
INU
IMS
REL
TAT
INS
Israel:
CEL
PCL
PTR
Italy:
GOM
HUI
ITV
OMN
TIM
VOM
WIN
XET
FWB
Kazagstan:
EST
KCL
KMB
KZK
SKZ
Korea:
SKT
KOR
Mongolia:
MPC
Nedirladny:
BEN
MMO
ONL
QIC
TFT
TNL
VDF
VDP
XEN
KPN
New Zealand:
VNZ
TNZ
NZC
Norway:
TEN
NEE
Pakistan:
WDC
PAK
Poland:
ERA
IDE
Pls
PRT
XEO
Romania:
CNX
HAT
ORO
COA
Russia:
AZC
BLN
EMT
ERS
GEO
MTV
SER
SNT
Singapore:
BGD
XSO
XSP
Slovenia:
MOT
SIM
Slovakia:
GTL
IRD
TMS
ORS
South Africa:
XFA
XFC
XFM
XFV
XFE
Spain:
AMN
EUS
FOP
XEC
ATL
Sweden:
BAU
BCN
BME
BSG
BTH
COV
HTS
SEN
TET
TLA
XEE
VDS
TNO
Switzerland:
AUT
ORG
MOZ
SUN
SWC
Taiwan:
TWM
BRI
TCC
TCI
CWT
Thailand:
CAT
THE
THL
THO
THS
Tanzania:
SOL
Tunisia:
ABS
RNG
Turkey:
BAS
KVK
TUR
TLP
TRC
Ukraine:
KVR
SEK
UMC
SOUTH AFRICA:
MID
ARB
XSG
AFR
ITO
Great Britain:
BTC
O2I
O2U
ORA
TMU
TSC
VOD
XEU
VIR
H3G
CPW
USA:
AWS
DOB
TMB
CLW
Uzbekistan:
UZB
Vinisuela:
VMT
Vietnam:
Xxv
PHU
XEV
DNA
FPT
SPT
TLC
VTC
VTL
A simplified way to find firmware
or if you do not know how to search for the firmware already on the sites presented. Download the console program - Samsung Firmware Linker. How to use the program?
For example, if you are looking for the firmware on a GT I9500 smartphone (Samsung Galaxy S5)
1. Launch Samsung Firmware Linker
2. Choose which group your smartphone or tablet belongs to ( EK, GT, SC, SCH, SGH, SHV, SHW, SM, SPH, YP) and press Enter
3. Write the model and press Enter
4. You will be redirected to the page with firmware for your device
That is, if you have a Samsung Galaxy S5 GT I9500 smartphone, write GT, press Enter and write I9500
Switching to firmware mode (bootloader)
When flashing, the loss of programs and their data is possible (but not melodies, pictures, etc., does not apply to Recovery)1. After installing the drivers and downloading the firmware, you need to put Samsung into the firmware mode (bootloader or boot):
For old smartphones it looks like this (until mid-2011):
Turn off the smartphone / tablet and hold down the Volume Down buttons plus the On / Off button
after which such an inscription will appear
If you can't switch to Download mode
For new smartphones it looks like this:
Turn off the smartphone / tablet and hold down the buttons Volume Down + Center Button + On / Off Button
we get here such a menu, release the buttons and press the Volume Up button
2. Connect Android to PC and wait until the drivers are installed.
3. Start Odin, a window should appear in the upper left corner that the device is connected
4. Add the firmware files to the Odin program
Now let's move on to the firmware process, or rather, how to set everything up correctly to work!
Firmware. If the firmware is Single-file
Insert the firmware into the PDA field (press the PDA button)
If the firmware is Multi-file
File PIT(if any) in the field PIT (press the PIT button)
File APBOOT_xxxxx.tar.md5 in field Bootloader (click on the Bootloader button)
File CODE_xxxxx.tar.md5 in field PDA (press the PDA button)
File MODEM_xxxxx.tar.md5 in field PHONE (press the Phone button)
File CSC_xxxxx.tar.md5 in field CSC (press the CSC button)
do not change anything and do not check the checkbox in the left corner (if this is not required)
5. After you have selected the firmware files, press the button START and after that the Android firmware will start which will last from 2 to 5 minutes. Then a message will appear PASS or RESET, the firmware is installed and the smartphone will reboot (you can disconnect samsung from the PC).
This completes the firmware. Successfully flash it!
Samsung won't boot after flashing?
If after flashing Samsung you have an eternal boot, then you need to perform a data reset or the so-called WIPE, , if you were running Root or installing custom firmware, turned off the electricity or something went wrong - then you need an article after Root Samsung does not boot. ...
Firmware for kernels (boot.img, zImage), recovery files and modems
How to flash a modem?
If you are told to flash the modem, then this means that you need modem file insert into field Phone and flash it
How to flash the kernel or Recovery?
If you are flashing a third-party kernel or Recovery and you have Android 5.X.X or higher preinstalled, then you need to make certain changes to the Android settings:
1. Enable "USB Debugging "And in the same settings enable" Unlock OEM»;
2. Disable " Remote control»Samsung;
Flash the kernel, kernel or CWM means that you need to insert the file into the AP or PDA field and flash it.
(rutube) (/ rutube)
Possible problems installing Recovery
If suddenly after you have requested custom recovery. but you go in and see that recovery remains standard. Then this instruction will come in handy!
1. In ODIN, uncheck AUTO REBOOT
2. Flash custom Recovery
3. Turn off Android device
