home Electronic wallets

Which side to insert the sim card into the iPhone 5s. How to open the SIM card slot on iPhone? Well, it seems we have everything to install

Warning on line 286

Warning: Parameter 2 to wp_hide_post_Public :: query_posts_join () expected to be a reference, value given in /var/www/4apple/data/www/site/wp-includes/class-wp-hook.php on line 286

Every year our smartphones become more functional, resembling computers rather than phones. And only one common feature remains unchanged - the presence of a SIM card. It consists of a chip surrounded by plastic, and its main purpose is to recognize a subscriber on the network. mobile communications... Smartphones have an interesting tendency to change in size, becoming thinner and more practical. Similar processes are taking place with a SIM-card - the amount of plastic is constantly decreasing, making room for new elements in devices.

As an integral part of our gadgets, the SIM card changes its appearance along with the development of technology. Before proceeding directly to trimming the SIM-card, let's look at its types:

a full-size SIM-card is rather large, resembling a bank card in appearance. Such SIMs were used on the very first cell phones. To date, full-size SIMs are out of service; It is easy to confuse a full-size SIM card with a bank one.

mini-SIM (25x15x0.76 mm) has gained popularity through long-term use in GSM phones;

Mini-SIM cards have been very popular for a long time

with micro-SIM (15x12x0.76 mm), there is a tendency to reduce the size of the SIM. Micro-SIM is the same mobile communication card, but without excess plastic;

Micro-SIM saved itself from excess plastic

nano-SIM (2x9x0.646 mm) - this is the smallest existing SIM;

Nano-SIM is the smallest of the existing "sim cards"

an embedded SIM is a new generation product, so-called eSIM chips that will not be removable.

eSIM chips will not be removable

Table: types of SIM cards

Having an understanding of the existing SIM-cards, as well as their appearance and sizes, we turn directly to the use of SIM in Apple products.

Table: using SIM cards in Apple devices

How to crop a SIM card for the desired phone model

Having determined the desired type of SIM-card, we proceed directly to the process of cutting the card, if necessary. As tools you will need:

sharp office scissors;

pencil;

ruler;

i-paper clip (a tool that opens the SIM tray);

sandpaper or nail file;

patience ("Hurry - you will make a fool laugh").

The sequence of actions is as follows:

Using the information about the parameters of the sides of the SIM card, carefully draw the dimensions of the future card with a pencil on the old SIM. This process is the most critical, since if you make a mistake at this point, you can cut off the excess part of the plastic, which will interfere with placing the card in the slot, or even damage the chip. It is imperative to draw lines from the side of the chip. To draw a corner correctly, you need to lay a line on the edge of the chip parallel to the SIM corner.

Marking is a very responsible process, it is important to avoid mistakes when drawing lines

Using an i-paper clip, remove the tray from the phone after turning off the device. Next, attach the SIM slot to the markings made on the old card. They must match in size. If everything is in order, then you can proceed to the next stage.

It is imperative to compare the size of the slot with the intended markup

After successful contouring, carefully trim off the excess with scissors. You don't have to try to cut everything at once, it is better to leave some plastic in order to prevent the chip from being damaged. Unnecessary thickness can be easily removed with sandpaper.

Gently cuts off unnecessary plastic

After completing the process of removing the excess SIM portion, insert the card into the tray to check the dimensions. If the SIM is hard to fit into the groove, you can reapply the sandpaper.

As a result, the SIM should easily fit into the card slot.

Before checking the SIM for operability, turn off the phone to avoid malfunctions. Then insert the tray with the SIM card into the special slot and turn on the phone. In case of a successful trimming, the mobile network will immediately appear and will work without interruptions.

Video: cropping a SIM card to the desired size

At first glance, the described process may seem complicated. However, following all the instructions, you will definitely get the perfect result and your SIM card will last for a very long time.

The globally popular iPhone 5s smartphones and other variations are incredibly easy to use. Every original iPhone is different high quality, a huge number of possibilities and a variety of functions. Despite this, the happy owners of iPhones, who took it in their hands for the first time and are preparing to use it, are already confused by the first question, namely, "How can I correctly insert a SIM card into my new iPhone?" In fact, this operation does not provide anything complicated, you just need to sequentially perform some actions. Which ones? We will talk about this further.

Preparing to use your smartphone for the first time

To insert a SIM card into a new iPhone 5s or some other model, the subscriber must first prepare the phone for the first use:

First of all, you need to make sure one hundred percent that the iPhone is not blocked due to the change mobile operator... A huge number of iPhones are locked to a specific mobile operator. If you want to switch to a different mobile operator, you will need to unlock the SIM slot in your own iPhone.
There are a significant proportion of iPhones that have absolutely no lock.
If the iPhone is still blocked on a specific network, it must be unblocked.

We select a SIM card and insert it into the phone

In order to successfully insert his SIM card into a new iPhone 5s or its other configurations, the subscriber must clearly and consistently perform the following steps:

If you follow the described actions very carefully, clearly and consistently, the described operation will end in success, and you will immediately be able to use your brand new smartphone.

In this article, we will tell you how to correctly insert a SIM card into your phone yourself. New modern models are coming out with convenient slots into which cards of the required size can be inserted without problems.

Yes, and all popular mobile operators produce original constructors - SIM cards of three popular sizes: nano, micro and standard.

A SIM card is an identification module for a subscriber of a telecom operator. Several decades have passed since their launch and before the start of mass sales, and during this time their shape and size have improved. This process was forced. First, smartphones appeared on the mobile markets, and there was simply not enough space under the back cover for parts. Technologies have improved, user requests have increased, batteries are more and more, phones are thinner, and space is less.

This evolution of cards allowed them to be reduced by almost half, and modern retractable slots significantly freed up space for other details.

Let's look at what types of sim are, what is their feature, and how to insert a sim:

Full-size (the presence of which many did not even know) is the largest in the line, along the perimeter like a bank card. It appeared in 1991 with the first wave of popularity of cellular communication among ordinary residents. It is not used in modern telephones, sometimes you can find cars with similar "innovations" a la the 90s.
Mini-SIМ - is still used for devices released from the 2000s to the early 2010s, supports 2G and 3G.
Micro-SIM - appeared in 2003, but at the moment it is considered the most used generation of communication modules. Supported by all manufacturers of modern gadgets with 3G and LTE.
The smallest is the Nano-SIM, which looks like its predecessor, only without the plastic edges. It appeared five years ago, and is used in all models of the Apple brand and some other premium manufacturers.

All types of SIM cards are inserted in the same way - into the designated slots in a smartphone or tablet. It is impossible to say exactly where the stand is, as the manufacturers reserve the right to place them anywhere, according to their design concept. Sometimes on new phones, a sticker is glued with step by step instructions, it can also be found in the User's Guide.

Installing a SIM card

Traditionally, manufacturers place card holders on the right side of the case (if the cover is not removable), or directly under the battery if it comes out. The following instructions are suitable for owners of the latter type of gadgets:

Check if your phone is turned off.
Detach the back panel.
Find a small indentation between the case and the battery.
Remove the battery.
There you will see SIM card slots. They are of different types: separate and two-story. The side to be held up when inserting will be shown next to the holder. Typically, it is inserted with the gold contacts facing down.
Insert the battery gently back. Make sure it fits snugly.
Return the cover until it clicks. They will mean that the cover is in place.

In the video, you can see how to deal with modern models that do not have a cover removed:

And here is another video with a useful life hack:

Settings

Modern smartphones and SIM cards do not require manual connection. The first time you launch it on a new device, you will receive a package of free settings for all types of cellular services from a mobile operator.

In dvuhsimochnye mobile devices, management can give a beginner a little difficulty. You can choose a SIM for certain default actions, or choose yourself on every call and message.

Will a regular SIM card fit into the micro-sim slot

You can cut a regular sized card to fit a micro-sim if the card is old. However, it is much easier and safer to contact service center, where you will be given a new Transformer Sim - in all popular sizes.

If the module urgently needs to be replaced with a smaller one, you can trim it by hand with ordinary sharp scissors.

What to do with an unsuccessfully cut SIM card

However, such experiments are not always successful. If the SIM card was incorrectly cut off and damaged at the same time, you need to contact the customer service points of your mobile operator. Replacing the card with another sim while maintaining the balance, tariff plan and, directly, the number does not take long.

It is not recommended to insert a sim that has mechanical damage.

SIM card malfunctions

Users guess about their malfunction when the OS does not see the module and does not indicate it with a corresponding icon. The reasons may be as follows:

The SIM has expired and is not intended for further use.
It has mechanical damage - scratches, chips and breaks.
Unsuccessful pruning. We mentioned it above.
The phone's firmware is tailored for a specific customer.
Slot problems.
Crashes in operating system and software.
The contacts were damaged during installation.
Dirt has got on the card holder.

In most cases, the card needs to be replaced, or the phone must be sent to the master for diagnostics, since these can be both hardware and system problems.

Conclusion

Mobile communications and the Internet are available throughout the day thanks to smartphones and small card modules produced by cellular providers. That is why you need to take good care of them, monitor their condition and serviceability. The more gadgets come out, the easier it becomes to use the SIM - their size decreases, and the possibilities grow. We hope you found this article helpful and provided you with easy-to-read instructions on how to handle them in different situations.

Video

None will work without a SIM card. mobile phone... Rather, it will work, but it will not fulfill its main function. Given the variety of slots and formats for SIM cards, it is important to know how to insert a SIM card into an iPhone. There is nothing complicated in this, but some points require clarification.

Note that modern smartphones (especially iPhones) are undemanding to this process. For example, older Nokia phones were incredibly complex in this regard. I had to bother a lot and look for a slot where to insert a SIM card. In the iPhone, everything is provided for the convenience of the user: here you do not need to remove the back cover, and even a special tool for removing the tray is included in the kit. However, the tray itself was not invented by Apple. All the same Nokia has implemented a removable tray for the first time. But this is past history, and we will go directly to the question itself.

Types of SIM cards

First of all, pay attention to the fact that different iPhones use SIM cards of different sizes. The third generation of Apple phones worked with regular-sized SIM cards. Then came the fourth generation of phones, which could only be inserted Micro card Sim. Further, the fifth, sixth and seventh generations work only with Nano Sim cards.

All these cards differ only in size: width, length, thickness. Therefore, when buying a starter pack, it is important to check with the seller so that he sells the card of the size you need. Some starter packs come with cards of all standard sizes at the same time: that is, there are special bending lines along which you can break a card for your phone.

Will a regular SIM card fit into the Micro SIM slot?

During the shortage of Nano and Micro SIM formats, people did not know how to insert a regular-sized SIM card into an iPhone, but they still found a way out. They simply cut a regular large SIM card to the required size and inserted it into the phone. Even the metal contact had to be cut off. Surprisingly, it worked and the phone received the signal of the desired operator perfectly. Even today, a typical stock SIM card can be cut to Nano or Micro SIM size and it will work.

But there is no such need today. Operators sell SIM cards of all sizes. And if you still have an old SIM card of a large size, and you bought a phone where it does not go, then in any mobile phone store it will be replaced with the required standard size. In this case, you don't need to know how to insert a SIM card into an iPhone. This can even be done in a store, and you just have to watch.

Installing a SIM card

So, how to insert a sim card into an iPhone? In the box to the phone there is always a paper clip (it is also called (iScrepka), with which the tray is opened. This clip can be seen by something else: a pin, a needle, nail scissors, even a toothpick. right side (on the side of the phone).

We take our paper clip, insert it into the hole of the tray (a very small hole), press it down a little, after which the tray will come out a few millimeters. Then we simply take it out with our hands completely.

When the tray is in your hands, place the SIM card in it. It is important that it is placed with the chip down, otherwise the card will not work. Although the tray is designed in such a way that it is impossible to insert the card in another way, some users manage to do it.

Now insert the SIM card tray back into the slot and press down a little.

Settings

Now we know how to insert a SIM card into an iPhone, but what to do next? Important: you don't have to turn off your phone. Previously, you had to remove the battery, and only then insert the SIM card, but now there is no such need.

After the SIM card is inside, the phone will ask you to unlock it. It is normal that it is locked by default. To do this, you will need to enter a PIN. You must know this code (it is indicated on the starter pack), but if this is your old map, then you already know it for sure.

We enter the PIN-code, the blocking is removed and the phone finds desired network... If the network cannot be found, then in the settings there is an item "Operator". There you can choose the operator who owns the card. The default option is "Automatic", and in this position everything should work fine. But there are also exceptions. Therefore, just choose your operator and the phone will immediately find the network. But if problems arise and you still do not know how to insert a SIM card into the "iPhone 5S", then move on to the next point.

If the SIM card is not detected

If, after the performed manipulations and even the choice of the operator, the phone writes: "No network", then this means that you inserted the card incorrectly or the SIM card is not working. But it can be even worse: this is when the phone is tied to another operator and can only see its SIM cards.

Yes, it’s unpleasant, but there’s nothing to worry about. They learned how to remove the lock long ago, so special slots for iPhones are sold on the radio markets, with which even a locked phone will work with any operator. Such a tray is inexpensive - about 150-200 rubles. The kit includes the tray itself, a special chip pad for a SIM card, a paper clip.

This article describes in as much detail as possible how to insert a SIM card into the "iPhone 6", but this instruction is valid for all models.

What if you have an iPhone and strong strangers ask your phone to insert their SIM card and make a call? Can't you refuse them, because calling your mom is sacred? Or are you changing your mobile operator? Or are you just selling your device from Apple, and you need to get your SIM card? It would seem an elementary operation, however, difficulties may arise with it.

How to insert or remove a SIM card on different models of iPhone, iPad

It is worth mentioning right away that SIM cards are inserted into the iPhone using a special small container. It is securely fixed in the case along with the operator communication chip. This "box" for a SIM card is usually located on the side panel of the device, it can be located at the top and bottom. Only a few Apple devices (iPhone 3GS, iPhone 3G) have a SIM card slot built into the top of the phone.

The appearance of the container is practically unchanged. It is a compartment with a hole for a special key.

On the right side we find the SIM card slot with a key hole

So, the key must be inserted into the hole and slightly pressed. You need to use force carefully, since the Apple device is crammed with boards and chips from top to bottom. And they are very easily damaged from any scratch.

The key with which we take out the SIM card slot

Most likely, the container will give in almost immediately and "jump out" as soon as you engage the special spring.

Using the key, take out the container with the SIM card

The question immediately arises: where to get the key? Often, phone manufacturers, and Apple is no exception, put the SIM card slot openers in the box with the device and fix it so as not to scratch the device during transportation.

Find the key in the box with the device

But if you did not find such a gift in the box, do not despair. To open the slot, you can use any object that has similar physical and geometric characteristics. The most popular choice for opening a SIM slot is a paper clip.

Paper clips for opening and pulling out the SIM card tray

A special key, like a paper clip, can be replaced with anything. For example, a needle (use only the blunt end), a toothpick, a piece of stiff wire, etc.

And the operation can be successfully carried out without a special key.

Do not use brute force, push too hard, or try to pry the container open with a knife. Most likely, this will lead to disastrous consequences and spoil the integrity of the case.

Video: How to Remove the SIM Card Container from an iPhone

How to remove a SIM card from an iPhone if it's stuck inside

Unfortunately, cases of SIM cards getting stuck in iPhones are not uncommon. This is especially true for the so-called cut and self-cut 3FF and 4FF SIM cards.

SIM-cards of 2FFm 3FF and 4FF formats, which are used when operating smartphones

If the SIM card is stuck, you must try to put it back in the tray, and then repeat the operation by pulling out the slot:

shake your phone: perhaps the SIM card will snap into place right away;
try to open and close the SIM container a couple of times;
find a small piece of heavy plastic wrap or very thin plastic. Using scissors, cut it to a strip, slightly narrower than the SIM card slot. Try, pushing this "tool" into the slot between the container and the phone, put the SIM card into place in the tray. When you feel the card snap into place, gently try to open the container again.

Video: how to remove a SIM card if the container is stuck

If the SIM card container does not move at all

If the SIM card slot does not respond at all to your attempts to open it, you will not be able to avoid contacting the service center. Such a problem can be solved only by completely opening the device, and without specialized skills and tools, the probability of damage to the device is extremely high. It is important to remember that service centers, along with support services, are created to help users and collect information on device defects and bugs. So by going to specialist departments, you also help companies make their products better and safer for you.

Removing the SIM card from your Apple device is easy. If you have any problems with this, do not panic and immediately rush to the service center. It is enough to show patience and a little skill, and you will cope with even the most difficult task.