How to insert a frame in photoshop cs5. How to insert a photo into a frame in Photoshop (Adobe Photoshop). Beautiful flower photos free online

Now let's do the same operation with another popular program- Photoshop.

I have installed on my computer old version- Adobe Photoshop CS2. And she suits me with everything. If you have a different version, it is possible that some aspects of working with the program will differ from those shown, but in general the algorithm will be the same.

Open the Adobe Photoshop program. We go File - Open



and in the window that opens, select our template from the folder where it is located. Now our template has appeared in the program window:

Now we need to open a photo of our sailor. Back to the menu File - Open and find our portrait on the computer. Our sailor appeared in the program window on top of our template.

I save all my templates at 300 dpi and 200 x 90mm. Therefore, after opening a photo of a girl, I adjust it (photo) to the size of the template. Otherwise, the photo and template can be very different. To do this, go to the program menu Image - Image Size... and in the window that appears, set the same resolution as the template, as well as a height approximately equal to the height of the template:

When resizing a photo, do not forget to check the box Keep proportions.

Now we need to move our sailor to the template. Let's start by activating Move tool

after which, hovering over the photo and holding the left mouse button, you need to "drag" the sailor onto the template.

Some versions of Photoshop do not support direct mouse dragging. In this case, we will act differently: on the tab with a photo of a sailor, we go Select all(our photo highlighted), then Editing - Copy. Now go to the tab with the template (frame) and click Editing - Paste.

If such a window pops up, click Transform:

Now our photo is on top of the template and we can freely move it with the mouse. To move exactly the sailor, and not the template itself, in the window Layers the layer with the girl's photo should be activated (click on it and it will turn dark blue):

Move the photo closer to the frame cutout. Now we need to move it outside the frame so that it can only be seen through its cutout. To do this, in the window Layers, hovering over the layer with a sailor and holding the left mouse button "lower" (drag) this layer down:

The layers were swapped and our sailor "hid" behind the frame:

I would like to slightly increase the size of our photo. Making sure the window Layers it is the layer with our photo that is active, go to the menu Editing - Free Transform:

A frame appeared around the photo. Holding down a key Shift, you can use the cursor to zoom in or out on the photo by holding it at any of its corners:

After resizing and fitting the photo in the template window, click Enter and the frame around the photo will disappear. It remains a trifle - to save our template in the "mirror" for sublimation. We go to the menu Image - Rotate Canvas - Flip Canvas Horizontally:

Our template is ready!

Well, to fix it, watch this video tutorial:

vYUDIdl4L6o

For every taste, but they all have different formats - Png, Jpeg, PSD.

How to insert a frame in Photoshop: Jpeg format


  1. First of all, open the original image.

  2. The main layer is needed. To do this, double-click on the layer thumbnail with the left mouse button. When the New Layer window opens, just click Yes. The layer will be named "Layer 0".

  3. Now you need to select the place where the photo will be inserted. To do this, you can use any familiar selection tool.

  4. Click Delete. A checkerboard pattern that appears in the selected area means that a transparent area has formed. Now press Ctrl+D and deselect.

  5. Open the photo you want to place in , and then select the Move tool and drag the photo onto the frame. If it is greater than , press Ctrl+T.

  6. Shift-click any corner handle and drag it inside the photo. The image must be placed above the frame, it should be slightly larger than its size. Press Enter.

  7. The last step is to change layers. It remains to merge the layers using the keyboard shortcut Shift + Ctrl + E, and the photo is ready.

How to insert a frame in Photoshop correctly: PNG format


  1. Open the original PNG image and the photo you want to frame.

  2. You must select the "Move" tool, click on the second photo with the left mouse button and drag it onto the image with a frame.

  3. The photo must be placed above the frame.

  4. Now swap the layers.

  5. Arrange the photo however you like by pressing Ctrl+T and holding Shift. Merge layers with Shift+Ctrl+E.

  6. Press Shift+Ctrl+S and enter the file name and type jpeg in the save window that appears, then click Save.

How to insert a frame in Photoshop: PSD format

This format is the most convenient, but in order to correctly insert a frame in Photoshop, you need to take into account some of its features.


  1. Open the original image and photo.

  2. Use the Move tool to drag the photo onto the framed image.

  3. The Layers palette will have many layers, not just one, as is the case with other formats. Find the frame layer and place the photo under it.

  4. Press Ctrl+T and while holding Shift, reduce the photo to the desired size. Arrange it in the frame however you like. Press Enter.

  5. In this case, the many layers give room for creativity - many of the elements that make up the frame are on separate layers. If you don't like something, you can disable or remove this item.

  6. Press Shift+Ctrl+S and save the photo as a PSD or Jpeg if you want to print the photo in a frame.

Photo frames to decorate your photos. New photo frames 3: blue borders, green borders, yellow flowers. Size templates: 3000x2143 pixels.

Free photo frames online - beautiful photo effects

At your fingertips are always ready to install free photo frames, more than a dozen thematic sections. Style, beauty and quality - that's what distinguishes our photo effects. Over 5,000 photo effects, photo filters and frames

Photo frame flowers new

Interesting online photo frames in golden design with decorative pattern and. Here you can insert a photo on the album page is revealed, and in the foreground is a sphere of a bouquet of pink magnolias. Complex and multifaceted models with small decorative elements. Vertical photo frame.

Photo frame flowers

And then fun! In Funny.Pho.to services you will also find beautiful photo templates that "wear" your photos with special filters and place them in beautiful vintage "plots".

Frame pictures new

Retro style gives tenderness and feminine images. Also here, the perfect shot, the grandparents were young. Photo frame online decorative bright colors that you can insert a photo on the background of an open book among flowers and pearl necklaces.

Beautiful flower photos free online

Very convenient collages for placing not only a photo, but also for writing it. Insert a photo into this delicate online decorative frame decorated with floral leaves on the background of the water surface, and also on the background of the frame shows burning candles.

13.11.2016 29.01.2018

Hello! Today's Photoshop tutorial is about detailed instructions — how to frame a photo using photoshop. All this is done very simply!

I used Photoshop CC in my work. The lesson is suitable for any version of Photoshop, including CS6, CS5, CS4 and so on..

Plan your work for the next 5 minutes in Photoshop:

  • Find a suitable frame for Photoshop and download it
  • Open frame in photoshop
  • Open photo in photoshop
  • Move photo to frame
  • Locate photo
  • Save or print

Let's start the lesson.

First you need to select and .

We chose . You can insert yourself most beloved in childhood, or your children or relatives.

After completing the lesson, the result will be something like this:

So, you have downloaded the frame. If you downloaded the same frame as we did, then you also have it in png format.

Step 1. Open the frame in Photoshop.

Open it in Photoshop. Press CTRL+O or menu File - Open, select the frame file.

Select a frame file and click Open

Thereafter, the frame will open in Photoshop.

Step 2. Open the photo in Photoshop

Open your photo the same way.

Step 3: Drag the photo into the frame

Now our task connect the frame with the photo. To do this, we will move the photo to the frame.

Right click on the photo layer, select Duplicate Layer.

Destination select file with frame. Click OK.

Our photo has moved! Change to a document with a border.

Step 4. Putting the Photo Outside the Frame and Repositioning It

Now we see that the photo is too big and it is on top of the frame. Because the photo layer is above the frame layer, you can see it in the layers window.

Drag the photo layer below the frame layer.

Fine! Now the frame will be on top of the photo, that's what we need!

Step 5. Scale the Photo Correctly

But the photo is too big, so we need to reduce it.

To do this, select the photo layer, click CTRL+T

The photo will have a transformation selection, use the cursor to lower the photo a little lower so that you can drag the edge of the photo selection.

Now drag the mouse around the corner to the right and down diagonally while holding SHIFT+ALT- this will reduce the photo proportionally.

Once you've positioned the photo exactly on the frame, press ENTER to finish the transformation.

Step 6: Save the photo

Now that you've framed your photo, you can save the resulting image.

Photo printout.

To submit a photo for printing, you must make sure that it has a resolution of 300 dpi. Otherwise, the photo will not print well.

To set 300 dpi or make sure it is set, go to the menu Image - Image Size


To do this, you and I will need a graphics editor Adobe Photoshop. I assure you, it's very easy to frame a photo with Photoshop, even if you don't know how to work with it at all!

1. Open the image in Photoshop with the selected frame (Menu File --> Open or the keyboard shortcut Ctrl-O):

In the center of the picture with a frame there is a transparent area (it is indicated by gray and white cells), in which the photo will be located.

2. Open the photo you want to frame.


And now on the toolbar on the left, click the button, "grab" the photo with the mouse and drag it to the window with the frame. The photo will be superimposed on the frame, and we need to move it down. To do this, find the panel on the right (it is called the palette) Layers (Layers). Now you have 2 layers on the image: one with a frame, the other with a photo. You need to move the photo layer down. This is done simply: click on the layer name and move it "under" the name of the layer with the frame.

Attention! If the frame layer is the background in the Photoshop document (Background), then you will not be able to place layers under it. To do this, you must first convert it to a normal layer. Just double-click on the name of this background layer and in the window that appears, click OK (you can name this layer if you wish).


Next, we need to resize the photo to fit the frame, and move and rotate it if necessary. First make sure that the layer with the photo is currently active, and not with the frame (the active layer is indicated by the brush icon to the left of the name)

We start resizing the photo: using the Ctrl-T key combination or through the Edit --> Free Transform menu, select it and change it as we need. To reduce the photo without distortion, do this while holding down the Shift key. The result will look something like this:


It is better to save the finished photo for further use (printing, creating wallpaper for the desktop, etc.) in the format jpg(Menu File --> Save As). And if you want to be able to edit it in the future, save the "source" as well - that is, save a version of the file in the format PSD.

Similar posts