Failed to download mms what to do. Why the smartphone does not receive mms. How to set up an Android gadget to send MMS. Free sending MMS to MTS subscribers

Setting up MMS on Android may be required in two cases. The first one is buying a new smartphone. The second is resetting existing settings to factory defaults. In any case, you need to change the configuration so that this service will work. This can be done in four ways:

  • Automatically.
  • With the help of a service center operator.
  • By manually entering the required values.
  • Using the operator's regional website.

All these methods will be considered in detail within the framework of this material.

Automatic setting

Automatic MMS setup on Android occurs with minimal human participation - this is its main plus. But the disadvantage is that it can be done only once - during the initial registration of the device in the operator's network mobile communications. After that, it is considered that everything is set up and there is no need to resend this data. Its order is as follows:

  • We install the SIM card in the appropriate slot of the smartphone and assemble it.
  • We turn on the device and, if necessary, enter the PIN code.
  • As soon as the registration is completed, the search for the required values ​​in the operator's database begins. After they are found, this information is sent to the gadget.
  • Next, the subscriber must accept the configuration profile and save it.

This completes the automatic tuning process. But the process of receiving and sending messages can be blocked. The activation procedure will be described later in the text.

Operator assistance

Unlike automatic, setting up MMS on Android with the help of a service center operator or by manual entry can be done many times - this is their plus. But on the other hand, in the process of their implementation, you need to perform certain manipulations, which slightly complicates the configuration process. Each of the operators has a free consultation number. For Beeline, this is 0611, for MTS - 0890, for Megafon - 0550. Next, following the instructions of the autoinformer, you need to establish a connection with the operator and order the necessary settings, which will then be sent to your smartphone. Then they need to be accepted and saved. After this operation, it is recommended to do a full reboot of the device, that is, turn it off and on. In some cases, you may need to activate the service. To do this, when calling the operator, please enable this service for this number. This completes the MMS setup on Android with the help of a service center operator.

Manual input

It is not always possible to reach service center, and MMS needs to be urgently received. In this case, the necessary settings can be set manually. To do this, go to the following address: "Applications"\"Settings"\"Networks"\"More"\"Mobile networks"\"APN". Then you need to enter the operator's parameters - this is the actual manual setting of MMS on Android. Beeline, for example, requires the following parameters:

  • Profile name must be Beeline MMS.
  • The home page in this case is http://mms/.
  • Data transmission channel - GPRS.
  • Access point - mms.beeline.ru.
  • The IP address is 192.168.094.023.
  • and the password are the same - beeline.

The rest of the values ​​remain unchanged. For MTS, you need to enter the following data:

  • Profile name - MTS Center MMS.
  • APN must be mms.mts.ru.
  • Login and password in this case are identical - mts.
  • Home page - http://mmsc.
  • The IP address is 192.168.192.192.
  • Port - 8080 (9201 may be used on some models).

As in the previous case, all other values ​​are left unchanged. Setting up MMS Megafon on Android requires the following values:

  • The profile name is megafon.
  • APN depends on the tariff plan. Here you need to look at the documentation that came with the starter pack.
  • Login and password in this case are identical - gdata.
  • The home page is http://mmsc:8002.
  • IP address - 10.10.10.10.
  • Port - 8080 (9201 may be used on some models).

We do not touch everything else and leave it as it is.

Another way...

Another way to get settings is to order them on the operator's regional website. To do this, on a computer connected to the Internet, via search engine we find the page we need. Then select the smartphone model and enter the captcha and mobile number. Then we click "Submit". Within 5 minutes the necessary information will be received. We save and install the necessary profiles. If the requested information was not received within 5 minutes, it is better to repeat the order on the same regional website of the mobile operator. It is also recommended to do a full reboot of the phone. After that, we send and receive MMS. There shouldn't be any problems. If something does not work, we look for an error. As practice shows, somewhere they did something wrong. You can delete the old profile and do everything again.

Results

This article has described step by step what is on Android for various operators. As can be seen from everything previously said, there is nothing complicated about this. The happy owner of a new smartphone can easily cope with such a task. It is enough just to follow all the instructions, and you should not have any problems with this procedure.

This article deals with the problem when the Android phone does not send MMS or does not want to receive (download) them.

Now the exchange of information is an important need of modern people, which they satisfy with the help of high-tech smartphones. A large number of files are sent continuously: music, messages, photos using a constant Internet connection. But this was not always the case, when the first phones appeared, it was possible to send only SMS and MMS, which are no longer very popular.

There are situations when there is no network connection, and you need to urgently transfer data. In such cases, users remember about mobile ways of communication. There are often problems with sending MMS, sometimes such messages are not accepted. Let's take a look at what might be causing this issue and how to fix it quickly.

Before looking for a problem, you need to think about the obvious reasons for its appearance, which are quite easy to overlook. This includes the following situations:

  • The absence of the appropriate amount of funds on the cell phone account, which is required for the transmission of MMS.
  • Invalid input phone number, or it doesn't exist at all.
  • MMS message size limit exceeded.

Are you sure that the number is entered correctly, there are enough funds on the account and the amount of MMS is not exceeded? Then the cause of the problem, why MMS is not sent on the Android device, should be sought in the connection of this service.

To solve the problem, you need to work a little with the settings. Basically, MMS and mobile Internet settings are set at the same time.

MMS settings on Android

First, you should try to order automatic settings from your mobile operator. You need to call the toll-free number to the support service, where the operator must indicate the model Android smartphone and wait for a response message. When opening an incoming message, all the necessary settings will be automatically connected.

Selecting an access point on Android:

Increase

Not all users are able to solve this problem. Many just don't come. network settings, and in some cases they are simply not available for certain device models. In this situation, you should use the following instructions to configure the gadget yourself:


How to send from Android MMS

Previously, when push-button phones were the main ones, to send MMS, you had to select the appropriate option in the message menu. When using modern Android gadgets, everything has become much simpler: it is enough to attach a file, for example, a photo, to a test message so that it is automatically converted into a multimedia message. It also works in the opposite direction - you should delete all multimedia files from the created MMS, which will turn it into a regular SMS message.

Increase

At the current level information technologies sending multimedia messages between subscribers, it would seem, has already outlived its popularity. However, in the absence of access to wireless Internet, this method of information exchange becomes the only alternative. That is why it is important for any user to know what to do if the question arises: “I can’t send MMS from Android” and how to solve it.

Not always problems with sending or receiving messages are related to a technical malfunction of the phone. Such a possibility should not be completely ruled out, but for a start it is better to perform preliminary diagnostics and network settings. It should be borne in mind that for a new SIM card, the settings come automatically the first time you use it in a smartphone. If your SIM card has been working for many years, such a function for it may be lost. It is also worth taking into account other possible causes of failures.

Why this feature doesn't work:

  1. This service is not available for some regions. For more information, it is best to contact your mobile phone representative directly.
  2. You also need to request automatic settings from the operator. To do this, it is important to provide the exact model of your phone. After receiving the data in a separate message, you should activate the service according to the attached prompts. If your smartphone provides for the use of two SIM cards, the setting is carried out separately for each number.
  3. Your recipient may have a different data plan that does not support this feature, or may use different network settings.

Often automatic updates cannot be used, or they do not work correctly. For such cases, it is desirable to configure the communication parameters yourself. Such an algorithm provides for some differences for different operators.

Solution to this problem

If it is impossible to use the ability to automatically configure network settings, you need to enter everything yourself. To do this, it is important to adhere to the above algorithm of actions, focusing on your phone model and the selected connection.

Steps for manually entering network parameters:

  • In the menu section of the smartphone, you need to find "Settings".
  • In this list, find the category " Wireless networks". Here are the communication settings, including data transfer and use of wireless Internet.
  • It is necessary to activate the "data transfer" item if it is not active.
  • Return to the "Wireless networks" menu and find the access point. Typically, the phone will issue two connection options, one of which will be responsible for the mobile Internet, and the second - directly for the ability to send multimedia files.
  • For a phone with two SIM cards, you must also specify the number to which the service will be connected.

If it is impossible to self-configure, you can contact your operator at the specified number or visit the service center (representative office) in person. For a communications center specialist, such procedures will take a minimum of time and will not present difficulties.

Not sent from Tele2

If MMS are not sent from Android to Tele 2 subscribers, it is necessary to check the correctness of the specified information. It is also worth asking your subscriber in advance about setting up a similar function on his device.

How to set up messaging:

  1. Call the number "679", act according to the instructions received.
  2. Register in the “Personal Account” on the resource, after which you will get acquainted with the settings section by activating the service.

If the manipulations performed are ineffective, it is worth using manual input. In the relevant sections, you will need to enter the specified information.

Template for filling:

  • Name - come up with your own.
  • APN - mms.teleru.
  • MMSC - http://mms.tele2.ru.
  • Proxy - 193.12.40.65.
  • Port - 8080 (9201).

After entering the information, you need to restart the device, and also check the function of sending and receiving messages.

Difficulties in sending messages to MTS

MTS subscribers use a similar service after activating the function in several ways.

Execution algorithm:

  1. Send an empty SMS field to the short number "1234". After that, also by SMS - informing the network parameters will come.
  2. If it is possible to access the Internet through a PC, it is better to create an account on the website of a company that provides such communication opportunities. This will allow you to find out the latest news and connection promotions, keep track of your expenses or order a tariff change. Also in the section "Internet - MTS Assistant" you can order the connection of the service. The address of the site of interest: https://ihelper.mts.ru/selfcare/.
  3. For direct communication and clarification of the details of interest, you can also use the feedback service on the site, or you can call "0876" and get verbal instructions for such cases.

If it is impossible to apply the above options, it would be more advisable to enter the information in the specified section yourself.

For manual entry, use:

  • APN - mms.mts.ru.
  • Login (username) - mts.
  • Password - mts.
  • MMSC - http://mmsc.
  • Proxy - 192.168.192.192.
  • Port - 8080 (9201).
  • Access point type (APN) - mms.

After completing all the sections, be sure to restart your smartphone so that the changes made are saved and updated. After that, check the send function: send any multimedia file to the nearest device of a friend or relative. If it is impossible to perform or if a failure is written on the screen, repeat the indicated actions or check the correctness of their execution.

Can't send MMS from Megaphone

Megafon subscribers also have access to services for sending and receiving multimedia files. For this, they are also used different ways connection, and in the relevant sections of the menu, specify the information below.

When manually entered:

  1. Name - come up with any suitable one.
  2. APN - mms.
  3. Login - leave blank.
  4. Password - leave blank.
  5. MMSC - http://mmsc:8002.
  6. Proxy - 10.10.10.
  7. Port - 8080.
  8. Access point type (APN) - mms.

Registration of your account is carried out on the official website: http://moscow.megafon.ru/help/settings/. If the option of receiving information via SMS is preferable, it is necessary to send a message to the number "5049", and interaction with the operator is carried out using the direct number "05002".

It is impossible to send or receive a message on the Beeline network

No less popular operator Beeline also took care of the opportunities for its customers. To do this, there is an official website with the possibility of personal registration and obtaining information of interest about new tariffs and services of the company. It is located at: https://uslugi.beeline.ru/. Parameters entered manually will also change somewhat.

When manually entering data, the following parameters are used:

  • Name - come up with any suitable one.
  • APN - mms.beeline.ru.
  • Login - beeline.
  • Password - beeline.
  • MMSC - http://mms/.
  • Proxy - 192.168.94.23.
  • Port - 8080.
  • Point type (APN) - mms.

Communication with the operator is carried out by free short number "060432". If none of the proposed options "does not work", it is better to contact the Beeline center in person.

What to do if it says failure when sending MMS from Android

Among the possible reasons why MMS is not sent from Android, some software system failures can also be distinguished. Despite the fact that using Android usually does not present such problems, you should know the possible algorithm of actions in such a case.

The main causes of malfunctions and solutions:

  1. Virus infection of files. As a preventive measure, you can advise the preliminary installation of a good protective program. If the problem has already appeared, you need to scan the system and remove a possible threat.
  2. Minor system failures may occur spontaneously or due to other problems. Simple ones are eliminated by restarting the device, or by resetting the settings to factory settings. In case of serious problems, it may be necessary to flash the smartphone, which is best entrusted to the service center specialists.
  3. Mechanical failures. Typically, this kind of problem occurs when unauthorized changes to the specified network settings. To correct such errors, it is enough to check the entered information.
  4. Installation special applications limiting the amount of transmitted information. This is usually convenient for contract subscribers, or when used on a child's phone. At the same time, such software can block the transfer of any files, including.

Usually, the listed smartphone malfunctions do not affect the data transfer function, but in some cases this may be the problem. If the phone is under warranty, the easiest way is to contact the service center. Relatively old devices can be diagnosed or repaired. It should be noted that such problems are not critical, but may indicate more serious problems that negatively affect the operation of the gadget.

Set up MMS for all operators

Before sending the selected file, make sure that its size does not exceed 500 Kb (for subscribers of one network) and 350 Kb (for sending to another operator). Usually, modern gadgets automatically compress the file to the desired parameters, but it is better to check this in advance. In addition to the above problems, there may be modern exceptional situations, for example, when such an opportunity is not provided specifically for your region of residence. Messages in this case may be delayed or come in an unreadable form.

Also, before sending, you must make sure that the entered number is saved in the international format (for the Russian Federation it is +7xxx xxx xxx). You should know that if the recipient's smartphone is turned off, your message is stored for no more than 72 hours, after which the subscriber will not be able to receive it again.

An Android smartphone usually sends MMS after setting automatic data. If the instructions say that it will be necessary to perform some manipulations, but this option is still not available, helpful tips our article will help to deal with the causes of possible failures, as well as determine the cause of the problem for subscribers of different operators.

To send videos and music in messages, you need to know how to set up MMS on Android. Automatic settings designed for popular smartphone models are sufficient in most cases. If you are unable to access the network and send files, you may need to enter the information manually.

Some subscribers ask the question of how to set up MMS on Android to the nearest office of their operator. Another option is to call the operator at the service number. The disadvantage of this method is a long wait.

When the autoinformer finishes voicing the menu, a transition to the line with the consultant will open. After the application is accepted, a notification with parameters is sent to the subscriber. They should be saved, then you may need to reboot the device. Sometimes activation is requested: you will have to call the consultant again. You can save time by entering the settings yourself.

How automatic tuning works

The advantage of automatically setting up MMS on Android is that it does not require the participation of the subscriber. When registering on the network, after installing a SIM card (and in some cases entering a PIN code), a message with ready-made parameters comes to the phone. You need to save it, then you can use the Internet and send multimedia messages.

The disadvantage of automatic debugging is that it is available only once - during registration. If the device is successfully connected to the network, there is no need to reconfigure.

Operator assistance in connecting MMS

If automatic setup was not successful, you should contact your network operator for help on how to set up MMS on Android. You can do this for free by calling the service number. The number of requests is not limited here.

MegaFon clients can contact a consultant at 0500 for help. When the operator answers, he needs to clearly explain the situation and say what the difficulties are.

In Megafon communication stores, you can configure the settings for free mobile device. To search for the nearest office, the command * 123 # "Call" is provided.

A Tele2 subscriber can order automatic tuning. To do this, call the service number 679.

Help for Beeline and MTS subscribers

Before setting up MMS on Android manually, you can call the Beeline operator by calling 0611. The call is not charged. You can also call the federal number 8 800 700 0611.

The MTS operator has a short support service number 0890. From phones of third-party operators or from stationary devices, you need to call the federal number 8 800 250 0890.

Instructions for Motiv and Yota subscribers

Network users The motive is how to set up MMS on Android, the operator will help by short number 111. From a mobile or landline phone, you can call the federal number 8 800 240 0000. But this is not the only service.

You can order automatic tuning through #919 "Call" . The disadvantage of this service is that with a large number of calls, the transfer of parameters will have to wait about two hours.

Another option is to send a request via message. Send a text to 0111 indicating the model of the device, the service to be connected (in our case, MMS) and your email address. The parameters will come to it.

There is also a support service for Yota network users. The subscriber can ask his question via SMS by sending a request to the number 0999. You can get advice on the operator's website or in a special mobile application.

Entering parameters manually on Megafon

You can set up MMS on Android through the menu items. Its titles differ in different smartphone models. Basically, you need to go through the following points:

  1. Settings.
  2. Wireless networks.
  3. Mobile network.

Standard parameters have been prepared for Megafon subscribers:

The cost of MMS may vary depending on the conditions of the tariff plan. Special offers from the Megafon operator will help reduce the cost of sending multimedia messages. There is no charge for incoming MMS.

Settings for Tele2 users

To send music and pictures from a Tele2 number in messages, the operator provides the following parameters:

In order to send MMS from your Tele2 number in the future, you will need to register in the system. To do this, after entering all the data, you need to send a multimedia message to yourself or another user.

If registration is not completed, the phone will not receive incoming MMS, but links to go to the Gallery. The same links will also be sent when sending a multimedia message to a device that does not support this feature. When you start working with the MMS-Gallery, an instruction with a sequence of actions will be displayed on the screen.

How to connect sending MMS for a Beeline SIM card

First, in the list of profiles, you should look for the name "Beeline MMS". If it is not displayed, proceed to create a profile with that name. For a Beeline SIM card, the parameters are listed below:

To complete the operation, you need to go to the message menu and select MMS Setup, then click on the connection profiles. You need to make sure that the newly created Beeline MMS is selected.

After carrying out all the operations, it is worth checking the result. Create a message, add a melody, photo or video to it and send it to the subscriber. If the MMS is delivered, then all actions have been performed correctly. If an error is reported, the entered data should be checked again.

Connection algorithm on MTS

To send multimedia messages from an MTS SIM card, you will need to create an access point according to the following parameters:

  • name - MTS Center MMS;
  • access point - mms.mts.ru;
  • username - mts;
  • password - mts;
  • home page - http://mmsc;
  • IP address - 192.168.192.192;
  • MMS port - 8080;
  • MSS - 250;
  • MNC-01.

To complete debugging, you need to send a message with the text MMS to service number 8890.

List of settings for network users Motive

To exchange multimedia messages on the Motive network, you will need the following settings:

Multimedia alerts (MMS) have entered the life and communication of a person so rapidly that it is difficult to do without them. In addition, not all phone models support the function of viewing such extensions as jpk., pnj. Below are detailed ways to open MMS through a computer.

Is it possible to view MMS on a computer

Telecom operators improve feedback and stand up for the openness of information for subscribers. Leading cellular operators Megafon, Tele2, Beeline have long opened official sites where you can view SMS, MMS and other useful information and settings for your tariff plan. This message standard includes video, sound files and images of various formats, while any can be disclosed. There are two ways to view MMS through computer programs from different operators:

  1. Connecting a mobile device to a PC.
  2. Without connection, by going to the Personal Account.

How to read MMS on a phone through a computer

To open a media file, the two devices automatically need to be synchronized. This means that the laptop or PC system should recognize the phone as removable device. You can also use the identification program, which is installed at the first start. To connect two devices, you need a wire with special connectors, as a rule, it is included with the phone.

How to view MMS through a computer - we will consider in stages:

  1. Take a mobile device.
  2. Insert the wire from the kit into the connector.
  3. Connect to PC via USB.
  4. After the device has been identified, open the "Messages" folder.
  5. double click click on the icon to open the required file, view the contents.
  6. You can save the MMS to your PC's hard drive using the copy command.

Mobile operator service

How to view MMS through a computer through a personal account via the Internet? A convenient and secure way that does not require a device to be connected. To do this, you need to go through a simple registration:

  1. Open the official website of your operator.
  2. Fill in the required fields.
  3. Login is the SIM card number.
  4. The password will come to email or SMS notification.
  5. Wait for confirmation.
  6. You can enter, use all settings, view information on services and tariff plans of this number.

How to watch MMS on MTS through a computer

When an MMS file arrives on a phone that does not support graphic formats, it is replaced by a link (page address), opening which you can view the attachment. There are two options for opening MMS on your phone through a computer:

  • The official website mms.mts.ru saves all the information that comes to the subscriber's number. It can be viewed at any time.
  • On the mms-portal mymms.ru, the operator offers advanced features. Either way, identification is required. After registering according to the instructions, you must enter the code from the MMS file and it will become available.

To Megaphone

At the Megafon operator, all MMSs are stored on the server. If there are no settings for receiving a multimedia file, a text notification is received. On the site plus.messages.megafon.ru. go to the "Messages" folder. Further:

  • the folder will reflect all the information sent;
  • go to "Inbox";
  • choose what you need:
  • click "Read".

Here you can also configure, send a response MMS. In the settings, it is possible to use not only a phone number to receive and send a multimedia file, but also an email address. It must be connected by sending a request to a short number via SMS. In a reply text message you will receive detailed instructions about further actions. In case of difficulty, you can always contact the support service.

To Beeline

How to watch MMS on a beeline through a computer is a task that even a schoolboy can handle. The main thing is that the “Pack of three services” with MMS, GPRS is connected to the phone (the limit on the size of received sent files is 500 Kb). There are two ways to connect a multimedia service:

  1. Dial the command *110*181#dial.
  2. Through a personal account on the site.

Settings allow you to exchange MMS between phones, using two devices via e-mails. Regardless of the transmission method, you can view a video or graphic file through a PC connected to the Internet by going to the site. When a multimedia message arrives, it is necessarily accompanied by a link with an individual address that starts with mms.beeline.ru.

On Tele2

How to watch MMS on Tele2 through a computer? The principle and sequence of actions, like most operators. The only difference is in the design of official sites and settings. Personal account. To open an MMS-ku, you must first check the service connection settings. In Tele2 tariff plans (regardless of the payment method), the receiving and sending service is basic.

An already registered subscriber can view the sent files via the Internet, following the algorithm:

  1. Go to the site t2mms.tele2.ru.
  2. Select gallery MMS.
  3. Enter the phone number of the subscriber who sent the notification.
  4. Enter the code you received.
  5. Click the "View MMS" button.

How to receive MMS on a computer without a phone

Internet is connected in each apartment. It is not news that information of various formats can be received and sent without having a mobile device at hand. The popularity of the service for sending multimedia files, including selfies, determines the uninterrupted operation of the network and mobile device, but does not always correspond, due to violation of settings or matching the model of the device. In this case, a personal device (PC, laptop, netbook, tablet) will help. You can receive a multimedia message via:

  • email address;
  • bluetooth;
  • USB cable;
  • IR port.

Instructions for receiving MMS:

  1. Read the SMS with the address to view the MMS.
  2. Follow the link to the site.
  3. Enter the password code specified in the same SMS.
  4. With the right actions, the message will open for viewing and its further saving to the hard disk.
  5. Information from different operators is stored from 2 to 5 days, then it is deleted so as not to load the server. Indications about the storage period come in the same SMS as the link.
  6. Do not accept or open links from strangers. In 50% of cases it is spam or a virus.

When using a Bluetooth module to receive MMS messages, you need to install the PC Suite utility for your phone model. The next steps will be:

  1. After installing the application for synchronization, the PC must be restarted.
  2. Go to the menu through the "Start", select "Devices and Printers".
  3. Open "Connect new hardware".
  4. After the phone is detected by the system, double-click to open it.
  5. Enter connection code, password.
  6. Launch PC Suite, wait for the device to connect.
  7. Through the "File Transfer" copy the contents to the hard drive of the PC.
Did you find an error in the text? Select it, press Ctrl + Enter and we'll fix it!

Discuss

How to view MMS on a computer

Similar posts