home Pyaterochka

Why doesn't the filter gallery work in Photoshop. Restoring missing filters in Photoshop CS6. Blur Filter Gallery in Photoshop CS6 CS6 introduces three new filters that allow you to create photorealistic depth of field through special

Also, let's say I want to apply it as a smart filter, which will make the filter action fully editable in case I want to change it later. To do this, at the beginning I need to convert the image layer into a smart object (more details), after which the corresponding icon will appear in the lower right corner of the layer thumbnail:

Now I need to apply the "Application" (Cutout) filter itself. In versions of CS5 and below, I would just have to go to the main menu tab Filter --> Imitation (Filter --> Artistic) and select the appropriate item, but in CS6 in the Filter menu, the group Imitation (Artistic) is simply missing, so I have to go through by Filter --> Filter Gallery (Filter --> Filter Gallery) and in the dialog box that opens, select the tab Imitation (Artistic), and in it already "Application" (Cutout):

And now the problem has arisen. Usually, when we apply filters as Smart Filters, the name of each individual applied filter appears below the Smart Object in the Layers panel. If later we need to go back and edit the filter settings, we simply double-click on the name of a particular filter. But in the case of Photoshop CS6, there is a slight difficulty. Any filters that we only access from the Filter Gallery (because they are no longer available to us from the Filter menu) are not marked with their actual name. Instead, they all go under the generic name "Filter Gallery", which doesn't tell us which filter was actually used:

This can still be good in a case like this where I'm only applying one filter, as I can remember its name quite easily. But what happens if I apply multiple Smart Filters from the Gallery? For example, now I applied Spatter from the Brush Strokes group and Diffuse Glow from the Distort group. Since they were only accessible from the Gallery, they are all labeled "Filter Gallery" in the Layers Palette, which makes it not so easy to tell which is which:

Restoring Missing Filters in the Filter Menu

This, of course, is not a huge problem, but, potentially, it can significantly slow down your workflow. Luckily, Adobe has figured this out and included the option to revert the Filter menu back to how it used to be in versions prior to Photoshop CS6. This option is located on the tab Editing --> Settings --> Plug-ins (Edit --> Preferences --> Plug-Ins). In the dialog box, check the box next to Show all Filter Gallery groups and names, then click OK and restart Photoshop:

And now, after restarting Photoshop CS6, we see that all the previously missing filters have become available through the "Filter" menu:

Let's reopen the photo, convert it to a Smart Object, and apply the filters we applied last time:

Like last time, the names of the smart filters applied to it appeared in the layers panel under the smart object, but this time we see one significant difference.

And again, because I was able to select these filters directly from the Filter menu this time, not from the Filter Gallery, Photoshop lists them given their real filter names under the Smart Object. If I want to change the settings for any of the filters by double-clicking on its name, or re-set the order in which the filters are applied to the image by dragging one above or below the other, I no longer have to guess which Filter is which:

Now each of them is displayed under its own name, and not under the general "Filter Gallery".

So the goals have been achieved.

It should only be borne in mind that even now, if you apply smart filters not from the "Filter" menu, but from the "Gallery", then they will appear in the layers palette under the general name "Filter Gallery".

We are starting a series of articles on the Photoshop Filter Gallery. To make it easier for you to work with them, I have prepared a visual example for each filter. You should always remember that the effect of a filter depends on the size of the image itself and on the settings you apply. With the same filter, you can get different results.

In this article, we will go over the package filters Imitation (Artistic) Let's get to know them and see how they work. So let's go to the menu. Filter - Filter Gallery.

1. Watercolor (Watercolor)

Simulates the effect of watercolor painting. Parameter Detailing (Brush Detail) sets the size of the watercolor brush stroke, from 1 to 14. Shadow Depth (Shadow Intensity) sets the degree of drawing and saturation of the shadow areas of the image in the range from 0 to 10. Texture sets the degree of use of a texture pattern that imitates the features of painting with watercolors, changes its values in the range from 1 to 3.

2. Application (Cutout)

Turns an image into something that looks like an applique of pieces of colored paper - all the colors and shadows in the image are averaged out, leaving a limited number of them. Parameter Number of Levels sets the number of color levels in the range from 2 to 8. Edge Simplicity sets the degree of "simplification" of the outline of the appliqué element in the range from 0 to 10. Edge Fidelity sets the accuracy of rendering sharp edges present in the original image in the range from 1 to 3.

3. Sponge

Simulates the effect of painting with a sponge. Parameter Brush Size sets the sponge size in the range from 0 to 10. Contrast (Definition) sets the color level difference between 0 and 25. Softening (Smoothness) sets the order of color transitions in the range from 1 to 15.

4. Film Grain

The filter is designed to simulate the reception of increased graininess. Parameter Grain sets the degree of graininess in the range from 0 to 20. sets the light level in the range from 0 to 20. Intensity sets the level of image detail in the range from 0 to 10.

5. Oil painting (Paint Daubs)

The filter adds texture to the image in the form of wavy or straight spots. You can select different brushes, as well as determine their size and hardness. Brush types:

Simple
Light rough (Light Rough)
Dark Rough
Wide sharp (Wide Sharp)
Wide Blurry
Sparkle

6. Neon light (Neon Glow)

This filter can be used to tone an image while softening it. Appends to objects in the image different types glow. Parameter Area (Glow Size) sets the size of the neon color area in the range -24 to +24. Brightness sets the brightness level of the neon color, which is selected in the field Color (Glow Color) ranges from 0 to 50. The color box shows the color of the neon light. Clicking on this color field displays the Color Picker.

7. Outlined edges (Poster Edges)

This filter finds all edges in an image and highlights them by surrounding them with dark lines based on pixel contrast. Parameter Edge Thickness sets the maximum thickness of the edges or stroke width in the range from 0 to 10. Edge Intensity sets the level of highlighting the edges of the contours in the range from 0 to 10. Posterization sets the number of applied color shades in the range from 0 to 6. Therefore, at 0, the color shades are very sharp, and at 6, on the contrary, they are smoothed.

8. Pastel (Rough Pastels)

Designed to simulate drawing with crayons. Parameter Stroke Length sets the maximum stroke length in the range from 0 to 40. Detailing (Stroke Detail) sets the level of image detail in the range from 1 to 20. In the list Texture

Brick
Burlap
Canvas
Limestone (Sandstone)

To the right of the option Texture the button is located Scale Relief sets the thickness of strokes in a crayon drawing from 0 to 50. Drop-down list Light (Light) is used to select the direction of the light source, which emphasizes the relief of strokes. Light direction options:

Down (Bottom)
Down and Left (Bottom Left)
Left
Top Left
Up (Thor)
Up and Right (Tor Right)
Right
Down and Right (Bottom Right)

Invert

9. Shading (Smudge Stick)

Simulates drawing shading with a wide solid tool. Parameter Stroke Length sets the length of the stroke that is feathered by the tool in the range from 0 to 10. Highlight Area sets the degree of illumination in the range from 0 to 20. Intensity sets the degree of image sharpness in the range from 0 to 10.

10. Drawing on the back (Underpainting)

The filter is designed to simulate a sketch with oil paints. Brush Size sets the stroke size of the brush in the range from 0 to 40. Texture Coverage specifies the degree of use of the texture image in the range from 0 to 40. In the list Texture the material on which the pattern is created is selected. The following options are offered:

Brick
Burlap
Canvas
Limestone (Sandstone)

To the right of the option Texture the button is located Load Texture, is designed to use another *.psd image as a base. Scale sets the texture scale in the range from 50 to 200%. Relief sets the thickness of the strokes of a brushed drawing, in the range from 0 to 50. Drop-down list Light (Light) is used to select the direction of the light source, which emphasizes the relief of strokes. The following directions of light are offered:

Down (Bottom);
Down and to the left (Bottom Left);
Left
Up and to the left (Top Left);
Up (Thor);
Up and Right (Tor Right);
Right
Down and to the right (Bottom Right).

If you check the indicator Invert, the display of dark and light areas of the image will change.

11. Dry brush (Dry Brush)

Imitates the artistic technique of "dry brush". The filter simplifies the image, reduces the range of colors in it, and creates areas with a common color. Parameter Brush Size sets the stroke size in the range from 0 to 10. Detailing (Brush Detail) Texture sets the degree of use of the texture in the range from 1 to 3.

12. Fresco

The filter is designed to simulate drawing on raw material. You should be very careful when using it, as the filter can make the image too dark. Parameter Brush Size sets the brush size in the range from 0 to 10. Detailing (Brush Detail) sets the image transmission accuracy in the range from 1 to 10. Texture sets the degree to which the texture is used, which should mimic the painting features of a fresco in the range from 1 to 3.

13. Colored pencils (Colored Pencil)

This filter allows you to create a hatching effect that retains most of the colors in the original image. Parameters are adjustableThickness, Stroke Pressure and Paper Brightness. When using a thin pencil, more lines are created in the drawing, and by increasing the pressure, more details of the original image will be preserved. Paper Brightness sets the level of paper transparency through a layer of pencil strokes.

14. Cellophane packaging (Plastic Wrap)

Covers the image with a glossy plastic film that brings out surface details. Parameter Highlight Strength sets the degree of whiteness of film wrinkles that reflect light in the range from 0 to 20. Detail specifies the number of folds in the range from 1 to 15. Softening (Smoothness) sets the softness of the light and shadows on the film wrinkles in the range from 1 to 15.

15. Spatula (Palette Knife)

The filter is intended for painting with oil paints with a spatula - a special tool for drawing. Parameter Stroke Size sets the spatula stroke size in the range from 1 to 50. Detailing (Stroke Detail) sets the image transfer accuracy in the range from 1 to 3. Smoothing (Softness) sets the degree of merging of adjacent strokes in the range from 0 to 10.

See you in the next lesson!

Noisy photos are a kind of marriage resulting from poor lighting. A large number of blurry color spots are distributed throughout the picture, greatly reducing its quality. This article will show you how to remove noise in Photoshop. There are several options for solving the problem.

Instruction

by the most the best way The fight against grainy noise is to prevent its occurrence. Poor-quality pictures are obtained in low light conditions, when the photographer has to increase the ISO values a lot.

Already at a value of 400, extraneous elements appear on the images. If the ISO is increased to 800, noise cannot be avoided. Due to blurry spots, the quality of the photo is greatly reduced. Defects can be removed using the tools built into the image editor.

How to remove noise in Photoshop using a filter

What if the photo is not in RAW format? How to remove noise from a photo in Photoshop if they were not removed at the stage of converting the file? To do this, open the image in an image editor. Then you need to open the "Filter" section in the main menu. Next, go to the "Noise" tab.

Here is the first filter to be tested. You need to select the "Reduce noise" line. Next, proceed to the settings. The "Strength" and "Keep Details" sliders are responsible for removing or reducing luminance noise. If you increase the first indicator to the maximum value, you will notice that the defects in the photo will be eliminated, but the text in the picture will become blurry.

The problem is that the fight against luminance noise causes a decrease in sharpness and detail in the image. Attentive users will notice that the second slider is added to the program so that the photo does not lose quality. After increasing the indicator, sharpness and detail appear, and with them noise. If there are no small elements in the image, then you can leave the second slider untouched.

Other settings

How to remove color noise in Photoshop? To do this, move the Reduce color noise slider. This will not reduce the sharpness of the text, noise will disappear, but small details will lose saturation. Users will notice that a colored halo has formed around the red spots. In rare cases, such changes may not be acceptable for the image. For this reason, you should set the minimum noise reduction values. If ISO 6400 was set when shooting, then it will not be possible to remove all defects in the image using a filter. Therefore, it is necessary to avoid high sensitivity of the matrix.

How to remove noise in Photoshop using the Adobe Camera RAW filter

First you need to download and install the plugin. Then you need to launch the Photoshop program and go to the menu. After that, you need to mark the line "Open" in the "File" section. To open the photo upload window, you can press the CTRL + O keys. Next, you need to select a picture with noise. To the right of the "File name" line, specify the Camera Raw type. The snapshot will immediately open in the program filter.

Then you need to go to settings. After that, you need to open the "Filter" section in the menu. Next, you need to mark the Camera Raw line. The filter window will appear. It can also be opened with SHIFT + CTRL + A.

Plugin setup

How to remove noise in Photoshop using this filter? First, the user needs to configure the plugin. You must check the box next to the "Control View" item. When working with the filter, the user will be able to immediately see the changes in the image. Next, go to the "Details" tab. It's the third icon from the left. You can zoom in on the photo using the slider in the bottom corner. It is necessary to increase the indicator to 300%. This is necessary so that the user can see the changes made.

Defect removal

How to remove noise from a photo in Photoshop using a plugin? To do this, find the "Color" slider and move it to the right. Do not try to remove luminance noise at this stage. It is enough to remove the color dots. After completing the task, you can begin to reduce the luminance noise. To do this, find the "Luminance" slider and move it to the right. It is necessary to observe the photograph in parallel. In each case, the value is determined individually. It is important to keep in mind one rule: the luminosity index must always be greater than the chromaticity value.

As a result, the sharpness of the photo will decrease. To make the image sharper, you need to move the "Effect" slider to the right. You can also increase the Brightness Info setting. To save the result, click on the "OK" button.

conclusions

When working with raster images, it is not recommended to use the built-in filter of the Photoshop program. The main reason is the appearance of color halos around the bright elements of the image. It is very difficult to remove luminance noise from smooth surfaces without losing the sharpness of fine details. The Camera Raw plugin allows you to increase ISO up to 6400 even for commercial shooting. The user can remove luminance and color noise while maintaining fine details.

How to remove noise from a photo so that at the same time to preserve fine details and leave the maximum sharpness of the frame? The question is quite complex and very common. That is why many tools have been developed to combat noise in different programs and plugins.

The ideal solution to the problem of noise is to prevent its occurrence during the shooting process:

set the correct
if possible, take pictures in RAW format;
compose the frame so that it is not cut off much during processing.

But if during the shooting all the conditions were met, but there is still noise ...

How to remove noise from a photo:

How to remove noise in Adobe Photoshop:

Before the direct removal of noise, on responsible shots, in each channel, for more subtle elimination. This allows you to save more details in the image and achieve a better result.

Reduce Noise Filter

In order to remove noise from photos in Photoshop, there is a special filter Filter – Noise – Reduce Noise (Filter – Noise – Remove Noise).

The dialog box presents two filter modes:

Basic - Set the parameters to remove noise from all channels in the same way.

Advanced (Advanced) - it becomes possible to configure the noise removal parameters in each channel individually (Per Channel (Per Channel)) and a setting similar to the Basic mode - (Overall (On top of everything)) (Fig. 1.).

Rice. 1 - Reduce Noise Dialog Box

Parameter Strength (Intensity) adjusts the degree of reduction of brightness (tone) noise in all channels.

The Preserve Details option allows you to save some image detail. But the larger the value of the parameter, the less noise is removed. The value of the parameter is determined empirically, depending on the original image and the Strength parameter.

The Reduce Color Noise option allows you to reduce the amount of chromatic noise.

Parameter Sharpen Details (Sharpness of details) allows to strengthen image sharpness.

The Remove JPEG Artifact checkbox masks the square fragments of an image that occur during JPEG compression.

Rice. 2 - An example of the action of the Reduce Noise filter

To enhance the effect, the filter can be applied several times. Short command Ctrl + F.

Adobe Camera RAW plugin

Adobe Camera RAW- a plugin that allows you to process graphic files before opening them directly in the program Adobe Photoshop. It was developed specifically for the RAW format, in which most professional digital cameras save photos.

If the source file is not in RAW format, but for example, JPEG, then Photoshop has a function that will allow you to open the image in Adobe Camera RAW File - Open As (File - Open As) - select Camera RAW - select file - Open (Fig. 3 ).

Rice. 3 - How to open a file in Camera RAW

In order to remove noise from the photo, you need to go to the Detail tab (Fig. 4). In the Noise Reduction graph, you need to raise Luminance to a level where noise begins to disappear and lower it to a minimum of Luminance Detail, followed by a rise to reveal fine details. Similarly with Color , color detail.

The Luminance parameter adjusts the level of luminance noise reduction.

The Luminance Detail parameter adjusts the noise reduction threshold. A small value gives a cleaner result, but details disappear with noise.

The Luminance Contrast parameter adjusts the luminance contrast on the edge between light and dark areas. Smaller values give better noise reduction results, but at the same time less contrast, a blurrier image.

The Color parameter controls the level of chromatic noise reduction.

The Color Detail parameter adjusts the chromatic noise reduction threshold.

Rice. 4 - Detail tab. Camera RAW Plugin Example

It is also possible to remove noise in Photoshop Lightroom, it has an intuitive interface, which is built by analogy with the Adobe Camera RAW plugin.

As can be seen from the above examples, with the task of suppressing digital noise The Adobe Camera RAW plugin does a better job than the Reduce Noise filter. Also among the advantages of Camera RAW:

carrying out non-destructive image processing;
synchronization of settings among images taken in the same conditions to increase processing productivity;
performance (Photoshop not loaded yet);
intuitive interface.

Noise Reduction Plugins

To suppress noise, in addition to Adobe Photoshop, other programs and plug-ins are also used (most often RAW converters). They are both paid and free.

Plugins for Photoshop: Adobe Camera RAW, Topaz DeNoise, Neat Image, Grain Surgery, Noise Ninja.

RAW converters(individual programs): Adobe Lightroom, Capture One, Bibble (Corel), Apple Aperture (Mac OS X only).

Those who use Photoshop version CS5 (or earlier) are used to the fact that in the menu tab Filters the entire list of available filters is presented. In general, it is convenient to quickly access and use them. With the advent of the next version - Photoshop CS6 - this menu has undergone a change, which has led to confusion and confusion among users. The fact is that a number of filters from this menu have disappeared altogether.

List of filters in Photoshop CS5:

Changed list of filters in Photoshop CS6:

As you can see, the following groups disappeared without a trace: Imitation (Artistic), Texture (Texture), Strokes (Brush Strokes) and Sketch (Sketch). In addition to this, a number of individual filters from the remaining groups have also been removed.

But do not panic, in fact, these filter groups have not disappeared anywhere. Yes, they are not in the main menu, but from Filter Galleries no one removed them! Thus, in order to apply them, you must first go to Filter - Filter Gallery(Filter Gallery). A familiar dialog box will open, in which you will find what you were looking for:

(Click to enlarge)

As you can see, all the missing filters are present here and you can still use them. But there was next problem regarding smart objects and their smart filters.

Smart Objects and Filter Gallery in Photoshop CS6

Let's say we have and we need to apply a filter to it.

If we choose from those filters that are displayed in the menu, then there are no problems - we see their names, and we understand what we have applied.

But if you need to use filters from the missing list, that is, through the Gallery, then we see that Photoshop does not write their names!

Agree, this is extremely inconvenient. Suppose we applied only one Application, it can still be remembered. What if we add another filter? And then another one? First, you can forget not just the names, but also in what order they were. Secondly, if you come back to this project in a week, or even handed over the PSD file to another person, what then?

Of course, you can click through them in order, opening a window with filter settings and thanks to this, to understand what it is. But it's so inconvenient... It slows down the speed of work...

Okay, I got carried away escalating this problem. The developers left us the right to choose and a way to fix everything.

Restoring missing filters in CS6

So, to return the missing filters in the menu to their previous form, you need to go to the Photoshop settings: Editing(edit) - Settings(Preferences) - External modules(Plug-Ins).

In the settings window that opens, check the box next to the setting Show all groups and filter gallery names(Show all Filter Gallery groups and names).

After that, you need to apply the changes and restart Photoshop.

Now the missing filter groups will return to the menu, which means that they will also show their name in smart objects, like the rest.

Noticed an error in the text - select it and press Ctrl + Enter . Thank you!

There are quite a lot of filters that are used to create various effects on an image. They are combined into groups: imitation, distortion, stylization, texture, strokes and sketch. All of these filters can be accessed via the menu Filter - Filter Gallery . If you open any image in Photoshop and go to the menu item Filter - Filter Gallery , you will see folders with the same names as the filter groups listed above.

Expanding these folders, you will see a row of filters, and you can look at the effects of these filters by selecting any of them. To the right are the settings. If the filter suits you, click OK. Below buttons OK and Cancel there is a drop-down list where you can also select any of the filters in the gallery.

Also in the gallery you can see the effect of several filters at once. To do this, in the lower right corner you click on the icon New layer of effects . And then you highlight the desired effect in the list of active effects to adjust it.

By clicking on the icon with the image of the eye, you turn off the display of the effect. Pressing again turns the display back on.

Filters of the Distort group

Filter group Distortion also used to simulate various effects.

Diffused glow filter

Often used for processing photographic portraits. Open a photo portrait in Adobe Photoshop CS5, duplicate the layer by dragging the layer on the palette Layers on the icon for creating a new layer. And on the duplicate, apply this filter, either from the Filter Gallery or through the menu Filter - Distort - Diffused Glow . In the filter settings, remove graininess, reduce the degree of glow, and adjust the translucency of the original.

Having achieved the desired effect, click OK, and then adjust the opacity of the layer, achieving the effect of glowing skin on the image.

Distortion and Spherization filters

Allows you to inflate or compress the image. Filter distortion does it barrel-shaped, or pillow-shaped. Filter Spherization makes it more evenly, in the form of a sphere.

Filters Wave, Zigzag, Ocean waves

They make distortion in the form of waves, each filter in its own way.

Filter Curl

Spins the image around the center

Third Party Filters (Plugins)

Filters from other companies that can be used in Adobe Photoshop CS5. Allow you to create various effects that are not in the program initially. Often they do a better job than built-in filters.

Some plug-ins are programs that themselves install files in the right place, after which this filter appears in the Filter menu. Some plugins are files with the extension .8BF, and they need to be placed in the filters folder for them to work.

This folder is located in the working folder Adobe software Photoshop CS5 and it's called plug-ins. This folder is called the same in all versions of Photoshop. Load the plugin file into it, open the program, and the filter appears in the list of filters.

Video on how to apply the Diffused Glow filter to edit photo portraits

You can get more detailed information in the sections "All courses" and "Utility", which can be accessed through the top menu of the site. In these sections, the articles are grouped by topic into blocks containing the most detailed (as far as possible) information on various topics.

Also, let's say I want to apply it as a smart filter, which will make the filter action fully editable in case I want to change it later. To do this, I first need to convert the layer with the image into a smart object (more), after which the corresponding icon will appear in the lower right corner of the layer thumbnail: