home WebMoney

The frame on the iPhone (iPhone) has peeled off, what should I do? how to put glass on iphone how to put glass on iphone 10

The screen of any communication gadget needs protection. Even if you have purchased the latest iPhone model, then do not neglect the opportunity to install an additional film on the display. This will extend the life of the phone, make it look attractive longer. Such mechanical damage as scratches, bumps will not be terrible if you know how to stick protective glass to the phone. The task is not easy, but if you follow the instructions, you can do it at home without outside help.

How to stick a protective glass on a smartphone

For a beginner, the procedure may seem complicated, but a few workouts will make you a real expert. It is worth noting that there is no significant difference in whether we glue a protective glass on an iPhone 5, other phone models or a tablet. The procedure remains the same. It is better for an inexperienced person to start from the back of the gadget, and then move on to the screen.

Necessary materials and tools

If you have just purchased a smartphone, then it is important to understand how to stick protective glasses on the phone. The display of the device is very sensitive to mechanical damage. Being just in your pocket, the gadget will be damaged by coins, a fingernail or keys. Even minimal scratches can cause bubbles to form during application. The same goes for situations where you just want to replace your old phone protection.

For the procedure you will need:

alcohol wipe;
dry cloth;
special liquid for cleaning TV or computer screens;
adhesive tape or dust collector;
glass.

Step-by-step instruction

An important point is the preparation of the workplace. Choose a room with a minimum amount of dust. A kitchen or bathroom is best. There is too much textile in the bedroom, which attracts particles to itself. Such a moment prevents the correct process and can complicate the procedure. If you do not know how to stick a protective glass on your phone, follow the steps:

Wash your hands with soap and water, then lay out the equipment, the protective glass for the iPhone 6 or other phone on a clean, smooth surface.
Before starting the procedure, remove the old film from the device. To do this, pull slightly on the edge at a 60 degree angle.
Use an alcohol wipe or cleaning cloth to remove dirt from the phone screen. Such a tool is sold in hardware stores or made independently. To do this, you need to mix 5:1 water and alcohol, add some dish gel there.
We rub the display to a shine. If there are dust particles, then we pass along the surface with adhesive tape or a dust collector.
We take the device out of the package and remove the film from it.
We set the protection so that it matches the central button of the gadget and the speakers.
Swipe down the center from top to bottom to secure the patch surface.
We expel the remaining air from the center to the edges with a credit card or a spatula, which is often included.

Do not press too hard on the screen to remove small air bubbles. They will disappear on their own within a few days after the procedure. As a result, you should get a smooth, perfectly even screen coverage. Although tempered glass on the phone has a thickness of only 0.18 mm, it perfectly protects the device from mechanical damage.

Is it possible to re-glue the protective glass on the phone

High-quality surfaces for iPhone 5s and other gadget models can be reused. To do this, carefully remove the glass and treat the adhesive side with formic alcohol. Gently wipe it with a cloth soaked in such a liquid, and let it drain a little. Then set the protection according to the speaker and the button. With light movements from the center to the edges, expel air and liquid. Small bubbles will disappear on their own in a day.

Video: how to glue protective glass without bubbles

The videos below will tell you how to equip a gadget display at home without the help of a specialist. You will learn how to stick screen protectors on phones or tablets. With such a coating, the screen will be reliably protected from negative impacts, which will allow it to retain an attractive appearance for a longer time. Protection will protect the device from scratches, as well as absorb shock when dropped. In this case, the sensitivity of the sensor of your phone will remain the same.

The time has come when the smartphone has become a part of our lives and we are ready to pay more than $ 1,000 for it. Not everyone will take this step, but judging by the number of modern flagships in the hands of users, people will buy such devices.

Today, screens are only increasing in size, and the case is gaining more and more glass elements. Therefore, if you drop your device, then time slows down and your heart jumps out of your chest. And all because you know how expensive it is to change the glass, and even the screen.

Protective glass can become a lifebuoy, which will save you a decent amount of money and nerves. But is it worth sticking it on your iPhone, because the phone is getting wider and the feeling is completely different.

Let's understand and first consider what these glasses are and what varieties exist.

What are the types of protective glasses?

I want to start by saying that here I will not talk about protective films. This is already the last century, they only protect against scratches and many simply forgot about their existence.

Whatever service you go to, glass will be offered first of all. They can be understood, because at least you can earn more money.

What is there with the views and what kind of glasses you can stick on your iPhone:

Standard protective glass. Surely you have often seen devices that have glass and it has a very large space along the contour.
Due to the fact that iPhones now have slightly curved edges, sooner or later it will become covered with bubbles around the edges and this is incredibly annoying.
Will it protect against impacts, for sure yes. But too often they will have to be changed in order for the device to have an aesthetic appearance. It is also worth considering the moment that the higher the quality of the glass, the less likely these bubbles are.
3D protective glasses/protective coatings. These glasses completely copy the front cover of the phone and it looks like you are gluing another screen on top.

If the phone is white, then the edging will be white, and the situation is identical with the black version of the glass (if I'm not mistaken, there are also transparent options). As a rule, it lays down much better, because it completely follows the contours of the screen and you will not see evil bubbles.
Of course, it also depends on the quality of the glass and who glues it, but this is a completely different topic for conversation.

With the views sorted out a bit, now back to the main question.

Is it worth sticking a protective glass on an iPhone?

I think everyone could notice people in transport or just on the street with phones on which cobwebs flaunt on glass. There are a lot of such people and I think you can guess that they dropped their smartphone on the screen, and repairs are not so cheap.

On the this moment There are following categories of users:

I do not like films and glasses, I want to enjoy the smartphone as it is.
I’d better stick it so that I don’t have to pay a fortune for glass replacement later.
Nothing will happen to the phone for a month, I will use it carefully, and then I will buy it.

The second - I will suffer a little, I will get used to the appearance with glass, but you can save a decent amount of money, if anything.

Well, the third, the most fun in my opinion, people who buy expensive phones and put off gluing the glass for later. As a rule, after a week, the glass is already broken. Well, either the sticker is postponed already until the moment when it's too late.

I lead to the fact that how many people, there will be so many opinions about the protective glass for the iPhone. I personally belong to the second category, because 300-400 dollars for repairs do not lie on the road.

Therefore, if you understand that you are a little clumsy and often dropped your past phones, then it is better to play it safe and still stick it on. No one is immune from the fall of the smartphone, moreover, the situations are different.

I have suffered enough with ordinary glasses, so I can only recommend 3D glasses. Yes, they are more expensive, but you will change much less often and there is less chance of annoying bubbles.

I definitely can’t forbid using without glass, this is your personal decision. There are people who use phones without protection for just years and everything is in in perfect order. But if you looked here, then I don’t think that you belong to this category of people.

A couple of tips and useful points before sticking a protective glass on an iPhone

I have been using iPhones since the days of 4S and then the film was enough. Now the screen sizes are simply huge, so since the iPhone 6, the glass is glued by default.

I want to share a couple of moments and observations so that you do not make my mistakes:

We buy glass in advance on eBay or Ali. Do not overpay crazy money for glass, the markups in stores are incredible. Order a couple at once before buying, save a decent amount.
We trust to stick the glass to a knowledgeable person. If you do it yourself for many years, then just beauty. But otherwise, go to a normal service, where they will glue it perfectly. Yes, it costs money, but it's much better than ruining the glass.
3D glass is the best. Perhaps this is just me, but based on observations, this particular option does not have bubbles and lasts a very long time until you hit somewhere.

With a case, by the way, not everything is so terrible, because everything goes approximately on the same level. Well, the moment with the Home button is also annoying, if you have such a version. But you can get used to it very quickly.

On iPhone 6. For example: onext protective glass. The price of which is only 150 rubles. At the same time, it perfectly protects the screen from various damages. You can not only hit it hard, but also carry out various manipulations with it with a knife.

Appearance and complete set of onext protective glass for iphone

The first thing that falls into the hands before starting work is, of course, the protective glass itself. It comes in a good package, where you can find all the features and specifications that it has:

Protective coating hardened or hybrid - what to choose?

The thickness of the flexible glass is 0.2mm. The superiority of hybrid glass over tempered glass is mainly due to its aesthetic aspect - it is thinner than standard tempered glass and better presented on the phone, especially when the protective layer does not cover the entire surface of the device. However, lovers of thin lenses may also be interested in the increasingly popular 0.15mm tempered glass thickness.

Both hardened and hybrid guards are so much faster, but they are equally easy to clean. However, it should be emphasized that tempered glass is more scratch resistant even with extremely sharp objects. Hybrids are much worse than damage, which doesn't mean they don't protect the display well. Both protective coatings can easily withstand the impact of falling objects. Unfortunately, it often happens that when the phone falls to the floor, the tempered glass is tempered, which is not consistent with the hybrid coating.

completely transparent;
the sides of the glass are covered with silicone so that the user is not scratched;
the glass is real, not fake plastic;
the perception of the screen remains unchanged with the application of protective glass;
the glass is coated with a special layer that has the function of anti-reflective.
Each glass can have different characteristics and properties.
On the back of each package there is an instruction on how to glue the protective glass.

The iPhone kit usually contains: an alcohol wipe, a rag for wiping, a sticker for a button, a card to remove air from under the glass, and the protective glass itself.

When such accidents happen, it is better to bet on a hybrid. The choice between tempered and hybrid glass should really come down to where the phone is stored and whether it's exposed to sharp objects or often dropped on the floor. The individual aesthetic preferences of the smartphone user are also important. A large selection of glass screen protectors makes it easy to choose the right lid, whether you choose the tempered or hybrid version.

It is a popular editor among software developers because these are color - coded keywords that make it easier to edit source code . Granby received a Bachelor of Science degree in Computer Engineering from Purdue University. When choosing a phone case, perhaps the most important thing to consider is what your lifestyle is, where you work, and how you spend your free time, ie. What environment are you using your phone in? If you work in an office, you like cleanliness, order, and are very careful - it goes without saying that you can do without a tray.

Protective glass application

Wipe the screen thoroughly with an alcohol wipe.
Then carefully wipe with another, dry, napkin that comes with the kit.
We peel off the protective film (number two) from the glass itself, while holding the glass at the edges.
Next, we try to put it very evenly and carefully on the screen of our phone.
Then you need to press your finger on the center of the screen (for better docking of glass and screen). Further, this speck expands, which indicates that the glass began to stick on its own. This process may take several minutes.
After all the glass has stuck, we expel the air remaining under the glass with the help of a card, gently smoothing it from the middle to the sides.
We remove the protective film number one.

The color gamut of the screen, its sensitivity and tactility did not suffer, as you can see for yourself. If necessary, you can stick an additional button "Home", which is included in the kit.

If you work in construction, farm work, athletics, enjoy outdoor activities, and never hold onto your phone, then you need to consider protecting your phone from bumps, dust, and scratches. Generic cases may not be the same unless you go to a phone accessories store from different options, checking out each one. The extra glass on the screen will give you even more protection. The screen does not shock, it will be resistant to mechanical scratches when interacting with sharp objects, sand, moisture and other contaminants.

You can also verify the strength of the glass by using a screwdriver or ordinary keys as an irritant, because it often happens that our glasses become their victims.

For clarity, you can watch a video on how to stick glass on an iPhone

The iPhone 7 Plus has a larger screen, which means it has more scuffs and scratches. Therefore, it is worth considering buying a good tempered glass screen protector, if you are looking for the best screen protectors for iPhone 7, look here. If you are looking for tempered glass for iPhone 7 Plus, check out the list below.

Protective glass Deppa 3D

Designed specifically for the iPhone 7 Plus (and iPhone 6s Plus), the Deppa 3D Protective Glass is 3D Touch compatible so no cracks or bubbles appear when pressed hard. It's real tempered glass, but it's designed so that if it breaks, the pieces are harmless, ie. it will not damage the screen or cut your hands.

This protective glass is coated with an oleophobic coating that repels grease from your hands, keeping the screen clean and fingerprint-free.

The Deppa 3D protective glass is very transparent, so after it is applied it is almost invisible. It comes with a microfiber cloth, a degreasing cloth, a sticker to remove dust particles, and a sticker for easy glass installation.

Safety glass Red Line Tempered Glass

Red Line is proud of its "world's thinnest" phone screen protectors. The thickness of their glasses is 0.2-0.3 mm, so that the sensitivity of the pressing force is not lost at all and it is even imperceptible that this glass is there.

The Red Line Tempered Glass is ideal for people who also use an iPhone 7 Plus case, as it leaves a slight indentation around the edges.

With a hydrophobic and oleophobic coating, this screen protector will always be clean and you won't have to carry a microfiber cloth with you.

The kit comes with two protective glasses and a guarantee for bubbles and cracks, Red Line promises to replace the glasses for free.

uBear Nano Full Cover Premium Glass

Another tempered protective glass, this time from uBear. Its protective glass is almost as thin as the previous one, 0.3 mm, and uBear promises 99% transparency, so after the sticker it should not be visible on the screen.

This protective glass completely covers the flat part of the iPhone 7 Plus screen, leaving a small space around the edges. Without a case, you might notice a ring around the screen where the screen protector doesn't cover. This is a fairly common "halo effect" today, as most phones have beveled edges around the edges.

uBear Nano Full Cover Premium Glass Tempered Glass comes with a lifetime warranty, so if bubbles start to appear, just report it to uBear and get a free replacement.

Safety glass NILLKIN

I personally used the protective glass NILLKIN, however, it was on the iPhone 6, but the glass lasted three years. Nillkin 3D CP+ is a real ballistic glass made from 5 layers of Japanese Asahi glass, the same company makes windshields for Mitsubishi.

Lifetime warranty on NILLKIN, and the company's website says that the warranty applies even if you get confused during the sticker and pasted incorrectly, you will receive a free replacement.

It's important to note again that the iPhone 7 Plus has curved edges, so these screen protectors will only cover a flat surface to prevent bubbles and peeling. With Nillkin 3D, you get superior transparency, unobstructed pressure sensitivity, and 3D Touch compatibility.

Baseus 3D Arc Tempered Glass

Baseus is also considered one of the best manufacturers of protective glasses for screens, if you do not want to glue the film, but want glass, you should pay attention to this particular manufacturer. Its safety glasses are made from a single layer, which combines all the qualities of a laminated safety glass.

Baseus 3D are classified as "smart films" as they easily adhere to the screen of the iPhone 7 Plus and have the ability to self-adjust when removing small scratches as if no one was there.

Like any protective glass, Baseus 3D has a warranty period, so if you are not satisfied with the quality, please let Baseus know.

Tempered Depp glass

Deppa tempered glass is completely transparent and barely visible on the screen of the iPhone 7 Plus. It's 3D Touch compatible, so you won't lose touch sensitivity or access to amazing touch features. It is scratch-resistant and if it breaks, it will not scratch the screen, since the edges of the glass are blunt when broken.

Includes protective glass, microfiber cloth, degreasing cloth, sticker to remove dust particles, sticker for easy glass installation. The glass costs 909 rubles.

What do you protect the iPhone 7 Plus screen with?

Do you want to recommend protective glass and use it yourself on iPhone 7 Plus? Write about it in the comments below!

Banks was founded in 2008. Represents a fashionable and creative brand of digital accessories. The product range is very large: screen protectors, protective cases, portable power supplies, charging device, holders for smartphones and gadgets, USB cables, adapters and many other related products.

"Think of us" is the brand concept.
Benks firmly believes that original and quality products can make a difference in every customer's life.

Comfort and convenience from the manufacturer

The company monitors the quality of digital accessories production on a daily basis. Benks uses imported raw materials to manufacture products, so each product is safe and certified, has no smell, unlike some competitors.

Benks® uses advanced manufacturing technologies

Thus, the buyer receives the best product that has passed rigorous quality checks. One of the leading brands in the category of protective glasses and screen protectors for smartphones.

For many years the company has been working on the production of protective coatings, so the range of products is very large. According to TaoBao statistics, Benks® is one of the leading brands in the protective accessories category. The company joined JD Mail in 2010 and has been a popular seller of screen protectors and gadget films for three years.

The company's protective coatings have passed the MFI certification from Apple Corporation. Banks is the first organization to receive a national patent for the production of protective glass for auxiliary equipment.

Design inspiration comes through love for the beautiful things in life. The combination of exclusive fashion trends and originality, foreign exchange of experience, training of employees in leading design schools, leads to the emergence of unique ideas and innovations in the design of manufactured accessories.

A smartphone is an expensive thing. Even when purchasing a budget class device from 5 to 15 thousand rubles, we want it to serve for a long time and faithfully. The fidelity of the gadget, in turn, depends on two parameters: internal and external. And if we cannot influence the first one (represented by the hardware), then we can overcome external factors just the same. We can protect our smartphone, if not from drowning, then from mechanical impact, for sure. And the glass on the phone will help us in this. How to glue it? This is what we will talk about today.

What is safety glass for?

It is hard to disagree with the fact that prolonged use of any smartphone does not imply the appearance of chips, cracks, scratches, scuffs. This fate is typical not only for the side faces, the top and bottom ends and the back panel, but also for the front part. And there is perhaps the most important element - the smartphone screen. Protective glasses were invented precisely in order to protect the display of the device. You can use a film, but it has a lower protection factor. In any case, it is important to know how to properly glue the protective glass on the phone.

What does it represent

Appearance The protective glass is similar to the exterior of the film. Indeed, the tasks of these two elements are similar to each other. However, it is rightfully considered to be a more reliable component, since it has a higher density compared to the film. In addition, it is transparent and flexible, and this also has a certain importance. Of course, it will cost more than the film. However, it is worth it, especially in cases where there is either a high probability of mechanical impact, or when the gadget is really expensive. For everyone, this bar is different, but most users prefer to buy glasses if their devices cost more than 10-15 thousand rubles. When buying, the user reduces the likelihood of damage to the main screen to almost zero, since the entire blow will be taken by the above component. Before talking about how to glue on the phone, I would like to focus on the advantages of the element.

Functions and useful properties

Much can not be said about the functions of the protective glass. From its name it is already clear why it was developed and what it is intended for. Whether it's a feature that you can talk about for hours. Their list, for example, includes resistance to scratches and other similar damage. Someone may doubt this parameter, but usually all doubts disappear after an indicative test. To do this, you can use ordinary keys. Run the sharpened edges across the glass and you'll see that it doesn't really mark.

The second useful property of protective glass is shock absorption. We have already mentioned this briefly above. A large number of smartphones, when dropped down the surface of the screen, receive physical damage up to the complete breaking of the display. With protective glass, this problem will be solved, because it will break instead of the screen. By the way, the word “break” here should also be understood a little differently from its usual meaning. Fragments from the phone protective glass do not scatter to the sides. Finally, we can note the fact that the glass is held very, very reliably. Especially if we compare it with a simplified element - a film. Users who so often ask questions about how to properly glue glass on a phone can be glad to know that this operation does not require any special experience.

We consider a complete set

A very large number of requests are connected precisely with how to glue the film (glass) on the iPhone 6 phone. However, it should be understood that the process is, in general, similar for other devices. And why then dwell on specific models, if you can describe the operation universally? First of all, let's see what is in the package with protective glass? Different manufacturers offer different equipment, but usually there is the glass itself, an alcohol wipe and a cloth made of a special material. If there are no rags or napkins, then you can use improvised analogues, this is unprincipled.

Glass on the phone: how to glue? We prepare the surface

If you have previously installed a film or glass, these components will need to be removed. To do this, remove the cover, if there is one, then we cling to the edge of the element. To prevent the appearance of greasy stains on the glass, you should thoroughly wash your hands and dry them in advance. By the way, the preparation of the workplace remains an important step. You need a flat horizontal surface and powerful lighting. It could be, for example, a table. Lighting will help to avoid unnoticed streaks and dusty areas. So what does it take to integrate glass on a phone? How to glue it? The correct operation will only be if the “bare” screen is processed in advance.

Why do you need cleaning

The screen freed from the film or glass should be cleaned with a damp disk soaked in alcohol or an alcohol wipe. Wipe the screen thoroughly so that no dirt remains on it. After that, you should wipe it with a special cloth, if it is included in the kit. If not, then you need to find an analogue. Now it's time to attach the glass to the phone. How to glue? Let's find out further.

The most important stage

There is a special film on the adhesive side of the glass. It needs to be removed. After that, we apply the glass itself to the screen. Care should be taken to ensure that it is aligned with the edges of the device, combined with the speaker and controls. By the way, you need to remember that you can only hold the protective glass by the edges. Only in this case there will be no traces after the operation. When the fit is complete, simply lower the component onto the screen. The glass will stick on its own. Great, now we know how to glue the glass on the phone.

Are there any cons

Yes, like other elements, protective glass has some disadvantages. Some users who are interested in the topic may think that the main disadvantage is the exponential complexity of the integration process. Like, if you stick it wrong the first time, then you can’t do anything later. In fact, it's not about that right now. The main disadvantage of this component is the fact that the device on which you will glue it will become more voluminous and heavy. However, if this does not bother you, and you are not very sensitive to the weight and size of the phone, but you want to protect it, then you can contact the salons cellular communication. They will offer not only the best products, but for extra money they will be able to glue the glass with high quality.

Pitfalls and tricks

Most users are afraid of air bubbles. Or rather, that they will remain. Few people can boast that they glue the protective glass neatly the first time, and there are no bubbles. However, they can be easily dealt with with a dry cloth. The procedure is simple to horror: just squeeze out the bubbles from the center to the periphery. The ability to glue protective glass will save money that is charged for this procedure in mobile phone stores.

Prices

Now protective glasses are quite important and common accessories. Therefore, a large number of companies are engaged in their production. Budget options are represented mainly by Chinese firms, which was to be expected. However, they are not that bad. Glasses of different brands differ only in the degree of hardening. However, one should not think that glass from a Chinese company will not provide the necessary degree of security. Now, after we learned how to glue tempered glass on a phone, we can move from words to deeds.