home Electronic wallets

Write version. Free programs for burning CD-DVD discs in Russian: List of the best

Instruction

Related videos

note

To burn a regular CD that can be played by most music centers and car stereos, the total file size should not exceed 700 MB.

Sources:

burn mp3 in sd format

At one time, the radio in the car was a symbol of status and luxury. Today, those radio models that were previously admired and dreamed of are outdated against the backdrop of full-fledged car media players. But not all people are chasing technological progress. Many are quite satisfied with CDs, so they often face the need to burn a disc for the radio.

Instruction

To burn a disc for your radio that it will read for sure, look for the user manual for your player model. Or, if you have kept it since the time of purchase, then use it. Find in it information about the formats that are supported by your radio. The most common ones that are played by radio tape recorders:

Faster and easier to copy songs on the disk using the Nero program, regardless of which subspecies of this program you choose - Nero Burning or Nero Express. Consider writing to disk using Nero Express. Open the program - then select "Data CD" - then "Add" (plus sign). A dialog box will open in which you can select the files or even music folders you need. Recording with Nero allows you to save to disk a large volume of audio files, since they are saved in their original format, that is, if the previous program changed the file format from mp3 to cda, then here they remain with the mp3 extension. On the left, the program has a small pointer arrow, by clicking on it, a window will open where you can set the recording speed you need. Experts advise not high speed, despite the fact that disk writes much faster. Just on some players disk with such speed of record can simply not be defined. The optimal recording speed is 8. After all the preparatory steps have been completed, click the “Burn” option - burn and wait for the recording to finish. If the recording was successful, disk the gadfly will open and allow you to extract disk. The same is true for recording audio files on DVD. disk.

To record music from computer on the disk you can use many ways, ranging from recording using the Wizard built into Windows to recording music using special software. The most popular way is to record music from computer on the disk using the Nero program.

Instruction

Open the Nero program. A window will appear in front of you, allowing you to select various program functions, separated into separate utilities. Select the Nero Burning Rom program and launch it. Then paste disk into the drive, and in the program select the type disk and on which the recording will be made: CD or DVD. After that, select the window for adding files, which resembles the Windows Explorer window, with files and folders.

In the file adding window on the right, open the folder containing the file you want to write to. disk . Please note that for recording it must be in mp3 format, or another that is supported by the device playing the compact disk and. Drag or copy the desired music files to the box on the left. Keep an eye on the indicator bar that shows how much free space there is on the disk e. Make sure that disk is completely filled, or all the necessary songs are copied for subsequent recording.

Press the "Burn" button, after which the physical recording should start on disk. Keep an eye on the burning process, it should complete completely when 100% of the files are written. Otherwise disk will be corrupted if it is not a rewritable medium. After burning, insert disk into the drive again and check how the music was recorded on disk.

note

This method describes how to record music from a computer to a disc in the form of mp3 files. Nero also supports the creation of audio CDs, on which music is recorded not as files, but as tracks. In this way, only 90 minutes of sound can be recorded on a CD, while the number of mp3 files is limited only by their size.

Useful advice

If you want music files to be added to an incompletely filled disc later, unfinalize it before burning it.

Sources:

how to download music from pc

Sometimes you need to burn an mp3 to a DVD to take it with you on the road, or listen to it on an appropriate player. If the disc was not burned correctly, the music device will not be able to play it or display all of the recorded items. Therefore, it is advisable to use programs for burning such DVDs.

You will need

- Nero, or any other optical disc burning software

Instruction

In order to burn mp3 files to DVD, install the specialized program Nero.

Start the Nero Express application. To do this, go to the "Start" menu, select "All Programs" - "Nero" - "Nero Express".

After opening the program, select the "Data" item, select the "Data DVD" sub-item. The Disc Contents window will appear.

Add your MP3 files to the project. To do this, click the "Add" button on the right side of the program. A window will open showing the file system hard drive. Select the desired folders and files and click on the similar "Add" button in the lower right corner of the application. The previous menu will open and display the selected files. As the disc fills up, the content will change at the bottom of the screen, which shows the remaining space on the disc.

Press the "Next" key. The disc burning settings window will open. In the "Current recorder" item, select the drive you are using. In the "Disk Name" field, enter a name for the future disk. Select the "Allow adding files" option if you want to record something after the burn is finished. After completing the settings, click the "Record" button.

Creating an Audio DVD differs from creating a regular MP3 disc in that in the Nero Express selection window, on the left side of the window, select the "Music" item, and on the right side select desired format(most often "Jukebox Audio DVD"). This disc will be available on any DVD player that supports MP3.

note

To burn a disc using standard Windows tools, insert it into the drive, select the required MP3 files and move it to the disc. Right-click on the drive icon and select "Write Data to Disc". This will also create a DVD that will play successfully on most music players.

Useful advice

There are many other programs that allow you to record MP3s in a similar way. For example, to burn a DVD using CDBurnerXP, you need to create a data disc and copy the songs you want to it.

Sources:

burn dvd disc player

Nowadays, almost everything can be found on the Internet: music, movies, texts, programs and the like. The need to use tape recorders is gradually disappearing, as it once happened with vinyl records and reels. But many have recordings that are hard to find elsewhere, whether they're collectible cassettes or a recording of a small child reading the first verses. You can extend the life of these films by converting them to digital form.

You will need

- record player;
- sound card with line input;
- cable;
- audio cassette.

Instruction

The vast majority of consumer cassette players have a headphone output. If it is not there, try to find a device with an output, this will greatly simplify the task. The connector is a regular 3.5" jack input. Find it on your tape recorder and make sure it works by plugging in your headphones. In addition, on some tape recorders cinch output connectors are available, usually white and red. These connectors can also be used to connect to a computer.

A device that will help connect a computer and a tape recorder for recording will be a cable. The cable can be purchased at hardware stores, computer stores, and specialty radio parts and equipment stores. In addition, the cable can be soldered independently. It is a three-core wire, each end of which ends with a 3.5-inch jack plug. You can buy it in the store by asking "cable jack to jack." In the case of a 2 cinch output, ask for a 2 cinch jack cable.

Connect one end of the cable to the headphone jack of the tape recorder, and the other end to the line-in jack of the sound card. The line input is a blue hole located on the back of the computer's system unit.

Open the sound mixer by double-clicking on the volume icon next to the clock. Make sure the line input is enabled on the mixer. Check to see if the "Off" checkbox is checked. If so, remove it and set the volume control to a sufficient level.

For recording, you can use the Sound Recorder program built into Windows. It is located at: "Start" -> "Programs" -> "Accessories" -> "Sound Recorder". (In Windows XP - "Start" -> "Programs" -> "Accessories" -> "Entertainment" -> "Sound Recorder"). In the menu "File" -\u003e "Properties" you can select the recording format, file name, as well as the place to save it. Recording is started by pressing the "Record" button, red circle. Click on the record button in the program and start playing the cassette in the tape recorder. At the end of the tape playback, click on the "Stop" button in the program and save the recorded file.

Useful advice

In order to get more options when recording and editing an audio file, you can use Adobe programs Audition, Sony Vegas, Sony Sound Forge and more.

Despite the fact that progress does not stand still, and more and more people listen to music in mp3 format on a computer, transfer files to each other via the Internet or on flash cards, sometimes it still becomes necessary to burn music to CD. For example, for a car radio or music center.

You will need

- a computer;
- CD-R disc;
- program Nero.

Instruction

It is convenient to use products from Nero, such as Nero StartSmart, to burn information on a CD. Install this program on your computer and run it.

In the window that opens, you will be prompted to select one of several categories. One of them is just dedicated to recording music on CD. Select it.

Your next steps depend on what you want to end up with. If the player on which you plan to use the disc supports playback of mp3 files, and you are satisfied with the sound quality of mp3, select "Make Mp3 CD". If the device supports only regular CD discs, then select "Create Audio CD". In addition, it is possible to burn a music disc with wma files, there is also a separate menu item for this.

After the required item is selected, a window for adding files will open. Select the desired music files and drag them to a free area of the window.

It should be noted right away that if you are an audiophile and burn music to CD in pursuit of sound quality, then mp3 files will not suit you as source files. Find the songs you need in one of the lossless compression formats, such as flac. Please note that older versions of Nero software may not recognize flac files and you may not be able to burn them to a music disc. Use for this purpose latest versions programs.

When required files selected, click Next. In the window that opens, select the CD-ROM with which you plan to burn a disc (do not forget to put a blank CD-R disc in the drive) and click the "Burn" button. Here you can also specify the write speed and some of the output data of the disc, as well as the required number of copies of the recordable disc that you plan to make.

burn music on the disk using a personal computer is a simple task. At the same time, a disc can be either a classical music disc or a collection of music files of various kinds. Both varieties disk ov are easily reproduced by all modern household players.

Instruction

Download free CD burning software disk s CD Burner XP. You can do this by following this link. http://cdburnerxp.se/downloadsetup.exe, then install it on your own and run it. A window will open allowing various functions such as creating disk and with data, iso image, DVD disk and musical disk a. Select the "Create disk with data". Then insert the CD- disk in disk gadfly, and select its type - CD or DVD. After that, select the Add Files window, which resembles a program window.

In adding files, open the folder containing the file you need to write to. disk. Music files to be recorded must be in mp3 format, or supported by the device on which you plan to play this CD. disk. Copy or drag audio recordings to the box on the left. For the amount of free space left on disk e, follow the indicator strip located at the bottom of the window. Make sure that all necessary tracks are prepared for recording, or disk filled.

To start physical recording of audio files on disk click the "Burn" button. Do not run any programs in the mode, so as not to accidentally interrupt the burning process, as if it is suddenly canceled disk, if it was not writable, might be corrupted. After burning, check the quality of the recording disk a, re-inserting it into the drive and running it.

note

You can also burn music to a disc using standard Windows tools. To do this, copy and paste the necessary files into the disk folder opened in Explorer and click the "Burn Disc" button.

Useful advice

If you want an incomplete disc to be able to add audio later, unfinalize it before burning it.

Recently, consumer media equipment is increasingly moving closer to computer, begins to "understand" initially computer data types. But there are still many music centers that are not capable of playing anything other than ordinary audio CDs. Otherwise, this type of disc is called CDA. On a computer, the list of songs on such a disc is seen as Track-01.cda. In order to record and play music compressed into mp3, you should use special programs to convert them into recordings.

You will need

Recordable CD-R disc.

Instruction

Select and copy to a separate folder about 15-18 that you want to burn to disc. The average playback time for a regular audio CD is 74 minutes. You can record up to 80 minutes maximum, but the larger the volume, the higher the likelihood of errors and problems during recording and playback.

Buy a blank recordable CD, called a "CD-R". Do not save money by buying the disc itself, otherwise, after a couple of months of use, the disc will stop being read or may not be recorded at all.

One of the easiest, fastest and most convenient audio CD burning tools is the free Burrrn software! Download this program from the developer's site. You can download any other, for example, Nero Burning ROM or Easy CD Creator - the essence of the process will not change. Run double click installing the downloaded program. The installation location does not matter. The program works in any operating system Windows.

Insert a blank disc into the drive. Close all unnecessary this moment programs - it's easy to mess up when writing, if some of the running programs require more processor time during the recording process.

Launch the audio CD creation program. The program window will open. Click the "Add" button to select a folder with songs to record. Select the folder where you copied the selected songs.

Select all the files you want to burn to disk and click the "Open" button. A list of tracks with names will appear in the program window. At the top of the window, you can enter a title and artist, but this is not required.

Select the lowest possible write speed - under the inscription "Writing Speed" in the upper right corner of the program window. The lower the write speed, the better the result will be. Below the recording speed selection, the total playing time of the selected songs is displayed. If this value is greater than 74 minutes, remove some from the list.

Click the "Burrrn" button to start the converting and burning process. The preparation and recording process window will open. When the recording is completed, click the "OK" button. After that, your disc has been burned, the program can be closed, and the disc can be listened to in a CD player.

To create a CD copy, you can use Nero Express, a simplified version of Nero Burning ROM. This application allows you to create copies both directly from optical media, and from pre-created and saved CD image files. The procedure itself, thanks to a well-thought-out simple program interface, is not difficult.

Instruction

Start the Nero Express application and select the Image, Project, Copy section in the left pane. As a result, a choice of three options will appear in the right panel - to copy the original CD to another optical media, select the option "Copy entire CD".

Place the CD to be copied into the optical disc drive. If reading and writing should be performed by different devices, then select them in the drop-down lists "Source drive" and "Destination drive". In the "Number of copies" field, set the desired number, and in the "Write speed" field, leave the value "Maximum" if you did not have problems writing to the disc you are using - otherwise, try reducing the speed.

Press the "Copy" button and the application will start reading the disk and creating a set of intermediate files it needs. You will see the progress of the process on the screen, and when this part of the procedure is completed, the program will pull out the tray with the disc being copied and offer to replace it with a disc for burning.

Insert a blank CD and the copy process will continue. At the end of it, Nero Express will issue a corresponding message and a sound signal, and will also eject the tray with the created copy of the disc.

If you need to write copy CD-ROM from a file with an image of this disk, then in the first step, instead of the item "Copy the entire CD", select "Disk image or save project". As a result, a window will open in which you need to find the image file on the computer media and click the "Open" button. In the next window, specify the required number of copies and, if necessary, change the recording device in the "Current recorder" field. After that, install a CD-blank into the optical drive and click the "Burn" button. The program will begin the process of creating a copy, and upon completion, it will beep and eject the tray with the burned CD.

Monkey's Audio is a popular freeware program used to compress audio files without loss of quality in the APE format. Of course, not all audio players will understand it, but even in this case you can burn these files to disk.

Instruction

Download and install the Monkey's Audio program to record your files in APE format. Go to the official website of the application, click on the link to download the file, then follow the on-screen instructions to install software to your computer.

Install iTunes if you do not have this application, as you will need it for further work with APE files. Open the installer and follow the on-screen instructions until iTunes is fully installed.

Right-click on the "Start" button and select "Explorer". In the left pane of the Browse window, navigate to the folder containing the files you wish to compress to the required format and burn to CD.

Open Monkey's Audio. Select all the files that will be recorded in APE format and drag them into the application window. Click on the arrow next to "Compression" in the upper left corner of the program and select the file archiving mode, and then click the "Archive" button " and wait until the application finishes creating APE files.

Open iTunes. Select the Edit menu, then Preferences. Click on the "Advanced" tab, then "Import". Set the "Import using" field to "MP3 Encoder". Click the OK button to close the settings window.

Click the File menu, then select Add Folder to Library. Navigate to the folder where the APE files are saved. Select all of it and click OK.

View the list of tracks in the iTunes panel for converting to a CD-burnable format. Shift-click on the top track, and then click on the bottom one to select them all. Right-click on the highlighted area and select "Convert to MP3". Wait until the conversion process is completed.

Insert a blank CD into the CD burner. Select the "Burn to CD" option from the menu that appears. Click the "Burn" button in the iTunes window to complete the process of burning the APE music files you created.

DTS is an encoding algorithm that was originally intended only for use in 5.1 multi-channel audio playback. It is in the DTS Audio CD format that audio tracks for cinemas are distributed.

You will need

- Ashampoo Burning Studio software.

Instruction

Use Ashampoo Burning Studio 10 to burn DTS audio albums. As a rule, these albums are contained in the form of two files: an image file and a file with the cue extension. The disk image format can be different, for example, wav, bin, nrg. This is not important, since the specified program will perfectly cope with any of these formats.

Launch Ashampoo Burning Studio to burn a DTS disc. Next, in the window that opens, select the "Create / burn a disc image" section, go to the "Burn CD / DVD from a disc image" item. Then click on the "Browse" button, select a file with the *.cue extension from the folder with the material.

Click on the "Next" button, insert a blank CD / DVD into the drive, burn it. During the recording process, do not open the drive tray, it is advisable not to run other applications in order to avoid interruption of the recording, and, as a result, damage to the disc / drive. Wait for the process to complete. DTS-CD recording completed.

Launch Easy CD-DA Extractor, go to the third tab "Create CD / DVD", open the folder, drag the file with the cue extension into the field to burn the DTS disc. Then click on the "Burn CD" button. After the process is completed, you will receive a real DTS-CD. You can listen to it with any household player that supports DTS. This can be found by a special icon on the player.

Run DVD program Lab Pro, import sound files into the program using the "File" menu, add an AudioTitle to the project, drag it onto it files audio, add images and captions if necessary, arrange transitions for navigation, create menus as desired. Next, set the playback sequence, compile the project, to do this, run the Project / Compile DVD command and burn it to disk.

UsefulUtils Discs Studio

Renaming UsefulUtils Discs Studio to aBurner did not bring new functionality to the utility, the application completely repeats the functionality of its predecessor. Maybe it's for the better, the aBurner disc burning program has not lost its main qualities - minimalism and stability.

aBurner

The main features of the aBurner utility are similar to UsefulUtils Discs Studio.

Free Disc Burner

Free Disc Burner is a comprehensive disc burning program that can burn any type of data to any disc.

Free Disc Burner

The interface of the utility is designed to be as simple as possible, yet has unique burning capabilities that allow users to create their own discs quickly and easily.

Free Disc Burner Features:

Supported media types: CD-R, CD-RW, DVD±R, DVD±RW, DVD-RAM, DVD±R DL, BD-R, BD-RE.
Features of Free Disc Burner:
Support for buffer protection technology (BurnProof, JustLink, etc.);
Determination of disk speed;
Selecting a disk file system;
Erasing a disk;
Multi-session or single-session recording on all supported disc types, including Blu-Ray (BD-R and BD-RE);
Create ISO images for all supported media disc formats;
Support for UNICODE file and folder names;
Support the function Turn off the computer when the operation is completed;
Support for DVD-Video format if VIDEO_TS and Audio_TS folders are added.

Free Disc Burner is a completely free disc burning utility.

Burn4Free

Free software for burning CDs and DVDs. The functionality of the Burn4Free application is generally similar to the Free Disc Burner. But there are also differences. So Burn4Free contains its own cover editor for discs.

Burn4Free

The main features of the Burn4Free utility:

Copying data of various types (WAV, FLAC, WavPack, WMA, M3U (mp3 Winamp compilation), MP3, MP2, MP1 OGG and CDA, CD audio tracks);
Nature SCSI, IDE/EIDE, SATA, USB;
Interface in several languages;
Cover printing on discs;
Writing and saving .iso files;
Support for dual-layer discs;
Record MP3 collection.

Active ISO Burner

A very small program for burning disc images. It supports burning ISO images to the following types of discs: CD-R, DVD-R, DVD+R, CD-RW, DVD-RW, DL DVD+RW, HD DVD, Blu-ray.

Active ISO Burner

Key features of Active ISO Burner:

Improved user interface;
Compact app installer;
Three independent interfaces SPTI, ASPI, SPTD;
Works under account user (using SPTD);
Represents information about an ISO file.

At the end of the burn, a complete log of the actions performed is displayed: errors and information about the progress of work.

Passcape ISO Burner

The Passcape ISO Burner utility is an excellent tool for burning ISO images. Passcape ISO Burner is compatible with most CD/DVD recorders and USB devices (including Memory Stick, Compact Flash, SmartMedia, Secure Digital, USB flash drives, USB ZIP drives, USB HDDs, etc.) The interface of the utility is minimalistic and very simple.

Passcape ISO Burner

Main features of the Passcape ISO Burner utility:

Burn ISO image to CD/DVD or USB drives;
Create bootable disks (including USB disks) from ISO images;
Extract ISO images to disk;
Simple user interface;
Does not require installation.

Small CD Writer

The functionality of Small CD-Writer is largely similar to aBurner and UsefulUtils Discs Studio, which is wrapped in a different shell.

Small CD Writer

For those who like the classic style of Windows 2000 or Windows XP, they will appreciate the Small CD-Writer interface, which is very reminiscent of the Windows application interfaces of yesteryear. From here, an easy-to-use program that can create multi-session and bootable discs, burn ISO images, view all available sessions on the disc and save projects as ISO images.

I hope the above applications will find their users who appreciate the minimalism of applications for burning discs and do not require 10 functionality from such programs in one.

> How to burn an audio CD?

Introduction.

Audio CD has been one of the most popular formats and media types for storing music for over 30 years. The first prototype of the format was presented in 1976 and is still supported today. Most home players play Audio CDs, and all music albums are released in this format.

To burn Audio CD (convert MP3 to CDA), you will need a CD/DVD burner. Almost every modern computer has such a device. You also need an empty CD-R disc for recording music (CD-RW is also suitable) and a special program. For audio CD recording we will use Audio CD Burner Studio. This application will allow you to quickly and accurately burn audio to disc. The program supports CD-Text, which will allow you to display information about the artist and song on the screen of a playing device - for example, in a car.

Step one: Download and install the program.

Download Audio CD Burner Studio to the selected folder and run the installation. Follow the installation instructions to complete the process.

Step two: Launching the program. Select audio files for recording.

Run installed program. The main window of Audio CD Burner Studio will open:

On the top toolbar, click "Add" to select audio files. The standard folder browser window will open:

Select the audio files you want burn to audio CD, and click Open.

Please note that a regular CD-R disc will hold about 80 minutes of music.

Step Three: Burn Audio CD.

The selected files will be added to the recording queue:

Pay attention to the list of audio files: the program has read their ID3 tags and will automatically write this information in the field CD Text. This way, your player will display the album information, the artist name, and the title of the current song.

Now let's see what can be configured. In the drop-down list at the top of the window, select the recording device if there are several of them on your computer.

You can change the order of songs on the disc using the green arrows on the toolbar by highlighting the desired track.

Finally, after making sure that the CD-R (CD-RW) is inserted into the burner, click "Burn". After that, the program will take some time to prepare the files and write them to disk, depending on the total duration. At the end of the Audio CD is ready to use on any player.

The trial version of Audio CD Burner Studio is fully functional for 30 days. If you like the program, you can register it and continue using it.

DVD video disc burning software is designed to create digital video discs that can be played on any DVD player. If you have videos of birthdays, holidays, New Year's events, dances, your pranks and any other pleasant memories captured on video cameras and stored on mini-discs, VHS-cassettes and other specific media, then it would be a good idea to record and structure them on DVD. DVDs can be stored for a long time and, today, they can be opened almost anywhere where there is a digital technology.

With the help of this class of programs, you will not need to edit each video separately and try to join them. You can create and record videos with interactive menus in various templates, divide videos into chapters for easier navigation, add subtitles and additional audio tracks, cut scenes from videos, and even create photo slideshows. And all this can be done quickly and easily.

Note A: You don't have to edit videos with only DVD video burning software. You can use any video editor for editing and editing. And this class of programs is only for importing and creating menus before burning to DVD.

Overview of Free Software for Burning DVD Video Discs

DVD Flick convenient and powerful DVD video recording

It is a fairly simple program, but at the same time it has powerful tools for editing and burning video to DVD. With this program, you can quickly turn video reports stored in different folders into a full-fledged DVD-video disc that will open not only on your computer, but also on any other digital players, including home theaters. At the same time, you can add additional audio tracks, for example, to clarify some important events. Insert explanations in the form of subtitles. And structure the video as a separate menu for quick and easy navigation.

The following features are noted on the developer's website:

Burn almost any video file to DVD
Support for over 45 file formats
Support for over 60 video codecs
Support for over 40 audio codecs
Easy to add menu
Ability to add your own subtitles
Simple and easy to use interface
Completely free, no adware, spyware and any restrictions.

DVD Flick allows even a novice user to create their own DVD video surprisingly quickly.

Quick Guide (Download Links for DVD Video Burning Software)

DVD Flick

		A simple yet powerful program to burn video to DVD. Supports many file formats and audio-video codecs. It's easy to add a menu. Own subtitles. And much more.
		-------------
		http://www.dvdflick.net/download.php
		13 MB 1.3.0.7 Open source freeware Windows 2000 - 7
		Support for 64-bit OS

Write version. Free programs for burning CD-DVD discs in Russian: List of the best

UsefulUtils Discs Studio

Free Disc Burner

Burn4Free

Active ISO Burner

Passcape ISO Burner

Small CD Writer

Introduction.

Step one: Download and install the program.

Step two: Launching the program. Select audio files for recording.

Step Three: Burn Audio CD.

Overview of Free Software for Burning DVD Video Discs

DVD Flick convenient and powerful DVD video recording

Other DVD video burning software

Quick Guide (Download Links for DVD Video Burning Software)

DVD Flick