How to reboot into BIOS from windows 10. Bios settings - Detailed instructions in pictures. Standard input when turning on the computer

Microsoft developers with each new Windows version innovate, improve the operating system, making it better and faster. But with all these innovations, the usual ways of solving some problems or problems for the average user have become a little more difficult. In particular, this applies to loading the BIOS settings menu. Naturally, in the Windows 10 operating system, you can still get into the BIOS, but now it’s a little different than before. in the new OS. this is the menu UEFI settings. Thanks to the implementation of the fast loading function in Window 10, which is now in a fraction of a second, you can have time to press the Del key or another function key to enter the BIOS, you can simply not be in time. If the system boots more or less normally, then entering the UEFI menu is easy from under the system.

Windows 10 BIOS how to enter

To get into the BIOS interface on Windows 10, you need to go to the system settings menu.

  • We call the parameters menu with a combination of two keys - Win+I (Win - this is the Windows key, on the keyboard it is usually located in the bottom row on the left). Or click on the icon notification center” on the toolbar at the bottom right of the monitor. And here we select the button " All parameters».

  • Next, open the tile Update and Security».

  • Here, in the left column, go to the subsection " Recovery».

  • We look in the center of the screen section " Special download options"- click here" Reload Now».

The computer will restart and before opening the BIOS on Windows 10 , the system settings menu will open, where we, moving through the sections, will load the BIOS interface for debugging or settings. The BIOS or UEFI interface, of course, does not claim the audience award, everything here is concise and to the point.


In addition, in the vast majority of BIOS everything is in English. In more modern machines, you can already find UEFI in Russian and having a more familiar to the user, bright graphical interface to replace the old BIOS.

How to enter BIOS on Win 10

  • After restarting the computer, a recovery window will open, in which we need to select the item " Diagnostics' or it may be referred to as ' Troubleshooting».


  • Next, go to Extra options».

  • Then we switch to the section "".


In some builds of this menu, which " UEFI firmware settings”, may not be, in its place there will be a download options section. How then to be? In this case, you can download the BIOS in a standard way, but first you need to disable Windows fast startup and use the key Del at system startup.

  • To disable the quick launch feature in Windows 10, you need to go to the system settings.
  • Go to tab " System».
  • Then select " Power and Sleep».

  • Then click on the link for additional power settings.

  • Where do we go to the section " Power button actions».

  • Activate the shutdown options section and uncheck the quick launch item. We confirm our choice.


Then we restart the computer. Now, at system startup, you can safely hold down the key to enter the BIOS, it will work, as before in earlier versions.
@

BIOS is base system input and output, which is designed to control hardware composite PCs. This means that any device can be correctly connected to the system unit or correctly configured in the laptop. Therefore, advanced users use BIOS settings to correct many errors and problems.

How to open BIOS in Windows 10 on a legacy computer?

There are several BIOS modes:

  • Outdated classic BIOS;
  • New BIOS-UEFI.

Each mode in Windows 10 has its own distinct interface and controls. The outdated BIOS has a white (gray)-blue interface and keyboard control. This means that in order to enable some function, all actions must be performed using the input method using the keyboard. The mouse does not work in this case.

The new BIOS mode - UEFI on each motherboard has its own bright design and any section can be opened using both the keyboard and the mouse.

To get in outdated version BIOS in Windows 10 can be done in several ways:

  • Press and hold the "F2" key while turning on the laptop.

  • The main BIOS menu in Windows 10 will open.

The second classic way to enter BIOS mode in Windows 10 is to configure the Control Panel sections. To do this, perform the following steps:

  • Start, Control Panel. Select the "Power" section.

  • Select "What the power buttons do" from the left menu.

  • Uncheck "Turn on fast startup (recommended)".

  • Now hold down the "Shift" button and select "Restart".
  • A black screen will appear with information about the motherboard. Below are several download options. Select the one you need to enter the BIOS.

Thus, you can get into an outdated BIOS with Windows 10.

How to open BIOS-UEFI in Windows 10?

If your computer has a new version BIOS-UEFI, you can start this mode as follows:

  • Click "Start", "Settings", select the section "Update and Security".

  • In the left menu, select "Recovery", click "Restart".

  • will appear blue screen. To enter the BIOS, you need to select the "Diagnostics" mode. In the next window, click "Advanced Options".

  • You need to select "UEFI Firmware Settings".

The system will enter BIOS. To exit the mode, you should press F10.

Also, additional ways to enter the BIOS can be viewed in the video:

The article will be devoted to the BIOS on a computer running operating system Windows 10.

If someone is not in the know yet, then here is some useful information for you, so to speak, in the furnace. If expressed in a simple and understandable language, then the BIOS is special program, which controls the startup of the computer and the loading of the operating system. As soon as the user presses the power button on the computer, bios starts testing the hardware for compliance and performance, checks for the presence of required connected devices ( HDD, RAM memory, video card, etc.).

By entering the BIOS, you can configure all kinds of startup options for the operating system, view system information about the computer and associated equipment, select / change the system boot source (hard drive, CD / DVD drive, flash drive) and much more.

But there is one nuance, which we will discuss further. You can enter the BIOS by certain actions, which are different for each manufacturer of the motherboard. For example, by repeatedly pressing the Del key while turning on the computer, but before the operating system starts loading. There are also options when you need to press the F2, Esc or F1 key.

The BIOS existed before, and still exists today. Let's find out how to get into the BIOS settings on Windows 10.

Computers running operating systems released after Windows 7 (windows 8-10) load the operating system in just a few seconds, during which it is impossible to press the necessary key and enter bios. But this is no longer necessary: ​​you can enter the BIOS in other ways, which we will now consider.

By the way, modern computers are equipped with an improved version of the BIOS, which is called UEFI. Necessary steps to open BIOS on Windows 10:

Alternative way

Another way to enter the BIOS when there is no access to the desktop on Windows 10, but the Logon Screen is open:

Click on the shutdown icon, press the Shift key and at the same time select the item, after which a menu of special boot options will open, in which you will need to repeat steps 6-8.

If the operating system does not load at all, then press the power button on the computer and repeatedly press the Del key (or F2, depending on the motherboard).

BIOS used in all personal computers for user interaction with hardware, has long outlived its usefulness, and in Windows 10 it was replaced by an updated UEFI interface, which is expandable through firmware additions.

What is UEFI

The next stage of evolution in the development of the BIOS, like the BIOS itself, controls all low-level hardware subroutines, and also performs the main function of its predecessor - initializing the hardware components of the PC before turning it on and transferring control data to the bootloader found on the drive.

Benefits of the new BIOS with improved GUI:

  • Reduced boot time - thanks to the use of thread parallelization technologies during hardware initialization (in BIOS, everything is done in serial mode), the time to check the status of hardware components is significantly reduced.

Interestingly, UEFI contains native drivers for most components, so Windows 10 can use them without forcing the user to download and install drivers themselves.

To boot the computer into the BIOS, a system of partitions called MBR was used - the master boot record. Having a strictly limited record length of 32 bits, its capabilities were enough to address disk space, which did not exceed 2 TB on one medium. With the advent of UEFI, developers have implemented a new information storage format called GPT. It supports orders of magnitude larger amounts of address space.

  • Unlike the BIOS, the new graphics system for realizing user control of the hardware before instructing the bootloader to start Windows 10 has an improved graphical interface. Also, booting into UEFI, you can use the mouse as an input device, which was not in any version of the BIOS.
  • UEFI has a set of the most popular applications (their list will be gradually expanded), for example, an Internet browser for navigating sites without using the capabilities of Windows 10.
  • Motherboards and laptops that use UEFI support all low-level applications due to the compatibility mode.

UEFI startup

Having considered the main advantages of the new BIOS, it remains to figure out how to enter its menu in order to boot from a USB flash drive (if necessary reinstalling Windows 10), change any settings in the functioning of iron or simply evaluate its graphical capabilities.

You can enter UEFI not only by the classic method by pressing a special key when you turn on the computer, as was the case with the BIOS, but also in several other ways.

  • We go to "Start", where we click on the "Settings" icon.
  • We go to the tab, which contains the settings responsible for updating the "dozens" and its security.
  • We click on the icon labeled "Recovery", then - on the button "Restart now".

  • Go to the "Diagnostics" section.

The next restart of Windows 10 will take us directly to the colorful menu of the new BIOS.

If this option seemed too complicated, take the opportunity to get into the BIOS using the classic method. The only thing is that for this you will have to deactivate the "tens" instant download function.

  • We go to the control panel applet called "Power Options".
  • We click on the link that will lead to the configuration options for the power buttons.

  • Uncheck the box next to the "Enable Fast Startup" option.

If you were looking for BIOS settings in pictures, then you have come to the right place.

The changes made will be protected by a lithium battery built into the motherboard and maintaining the required parameters in the event of a voltage loss.

Thanks to the program, it is possible to establish a stable interaction of the operating system (OS) with PC devices.

Attention! The present Boot network configuration section allows you to adjust parameters regarding system boot speed, keyboard and mouse settings.

After completing the work or familiarizing yourself with the Bios Setup Utility menu, you must press the burning Exit key, which automatically saves the changes made.

Section Main - Main menu

Let's start with the MAIN section, which is used to modify the settings and adjust the timing.

Here you can independently set the time and date of the computer, as well as configure the connected hard drives and other drives.

To reformat the working mode of the hard disk, you need to select the hard disk (for example: "SATA 1", as shown in the figure).

  • type- this item indicates the type of connected hard disk;
  • LBA Large Mode- Responsible for supporting drives larger than 504 MB. So the recommended value here is AUTO.
  • Block (Multi-Sector Transfer) - For faster work, we recommend choosing the AUTO mode here;
  • PIO Mode- Enables the hard drive to operate in legacy data exchange mode. It would also be best to select AUTO here;
  • DMA Mode- gives direct access to memory. To get more high speed read or write, select AUTO;
  • smart monitoring- this technology, based on the analysis of the operation of the drive, is able to warn of a possible drive failure in the near future;
  • 32 bit data transfer This option determines whether the 32-bit communication mode will be used by the standard IDE/SATA chipset controller.

Everywhere, using the "ENTER" key and the arrows, the Auto mode is set. The exception is subsection 32 Bit Transfer, which needs to fix the Enabled setting.

Important! It is required to refrain from changing the "Storage Configuration" option, which is located in the "System information" section and not to allow correction "SATADetectTimeout".

Section Advanced - Additional settings

Now let's start setting up the basic PC nodes in the ADVANCED section, which consists of several sub-items.

Initially, you will need to set the necessary processor and memory parameters in the Jumper Free Configuration system configuration menu.

By selecting Jumper Free Configuration, you will go to the Configure System Frequency / Voltage subsection, here you can perform the following operations:

  • automatic or manual overclocking of the hard drive - AI Overclocking;
  • change of clock frequency of memory modules - ;
  • Memory Voltage;
  • manual mode for setting the chipset voltage - NB Voltage
  • changing port addresses (COM, LPT) - Serial and Parallel Port;
  • setting controller settings - onboard devices configuration.

Power section - PC power

The POWER item is responsible for powering the PC and contains several subsections that need the following settings:

  • Suspend Mode- set the automatic mode;
  • ACPI APIC- set Enabled;
  • ACPI 2.0- fix the Disabled mode.

BOOT section - boot management

Here it is allowed to define a priority drive, choosing between a flash card, a disk drive or a hard drive.

If a hard drives several, then the priority hard drive is selected in the Hard Disk sub-item.

The boot configuration of the PC is set in the Boot Setting subsection, which contains a menu consisting of several items:

Hard drive selection

The boot configuration of the PC is set in the Boot Setting subsection,

  • Quick Boot– acceleration of loading of OS;
  • Logo Full Screen– disabling the screen saver and activating an information window containing information about the download process;
  • Add On ROM- setting the order on the information screen of the modules connected to motherboard(MT) through slots;
  • Wait For 'F1' If Error- activation of the function of forced pressing "F1" at the moment the system identifies an error.

The main task of the Boot partition is to determine the boot devices and set the required priorities.

  • ASUS EZ Flash- using this option, you have the ability to update the BIOS from such drives as: floppy disk, Flash disk or CD.
  • AI NET– using this option, you can get information about the cable connected to the network controller.

Section Exit - Exit and save

Particular attention should be paid to the EXIT item, which has 4 operating modes:

  • Save Changes- save the changes;
  • Discard Changes + EXIT- leave the factory settings in effect;
  • Setup Defaults- enter the default parameters;
  • Discard Changes- we cancel all our actions.

Given step by step instructions explain in detail the purpose of the main sections of the BIOS and the rules for making changes to improve PC performance.

Bios setting

bios settings - Detailed instructions in pictures

Similar posts